King Kutter S-ATV-180-U manual Technical Data

Page 8

A. REGULATING LEVER

B. HOPPER

C. DISTRIBUTOR VANES

D. SPREADER DISC

E. STEEL FRAME

F. TIRES

G. ROD FOR TONGUE ADJUSTMENT

H. TONGUE

I. 1-7/8” BALL HITCH

TECHNICAL DATA

S-ATV-180

	Hopper Capacity	165 / 43,6
	(liters/gallons)	165 / 43,6
	(liters/gallons)
	Weight of the Unit	80 / 175
	(kgs/lbs)	80 / 175
	(kgs/lbs)
	Width (wheel-wheel, outside)	1,05 / 41”
	(meters/inches)	1,05 / 41”
	(meters/inches)

	Loading Height	1,30 / 51”
	(meters/inches)	1,30 / 51”
	(meters/inches)

	Length	1,50 / 59”
	(meters/inches)	1,50 / 59”
	(meters/inches)

	Hopper Width	0,90 / 35”
	(meters/inches)	0,90 / 35”
	(meters/inches)

	Ball Hitch Diameter	4,7625 / 1-7/8”
	(cms/inches)	4,7625 / 1-7/8”
	(cms/inches)

	Tires	6,5 / 3,2
	(type/bar)	6,5 / 3,2
	(type/bar)

	Spreading Width	8 - 12 / 26’ - 40’
	(meters/feet)	8 - 12 / 26’ - 40’

	Ground Cover Per hour	from 27 to 55 ha/h
	Ground Cover Per hour	from 7 to 15 acres/h
		from 7 to 15 acres/h

8

Image 8

Contents ATV-180-U Page To the Purchaser Page Contents Name Plate Characteristics of the SpreaderInformation on the Machine Page Technical Data ATV-180Safety Signal WordsEquipment Safety Guidelines Check the correct operation of the machine prior to each use Manufacturer is not responsible in case Operation of the Machine Transfer on the RoadSafety Settings Pull Type Spreader USE Recommendations for correct distributionConnections Shaft Regulation BarSpreading disc’s vanes regulation AdjustmentsHow To Adjust The Spreader Vanes HOW to Adjust the Spreading Hopper Loading Spreading of the Material in the FieldPage General Maintenance Spreading MistakesReplacement of Spreader Vanes LubricationStorage Spare PartsATV-180 Parts Part Name Part NumberGear Box 900125 Limited Warranty