| IDLER | |
| NYLON | |
| ROLLER | |
SPRING |
| |
LOADED |
| |
ADJUSTER |
| |
| ROLLER | |
| CHAIN | |
FIGURE 11. RH AUGER CHAIN DRIVE | ||
IDLER | TRACKING | |
YOKE | ||
NYLON | ||
| ||
ROLLERS |
|
ROLLER CHAIN
LH AUGER SPROCKET
FIGURE 12. LH AUGER CHAIN DRIVE
SIDE LINE |
SHAFT DRIVE |
SPROCKET |
PTO INPUT |
SPRING LOADED |
ADJUSTER |
FIGURE 13. SIDE SHAFT CHAIN DRIVE |
RH AUGER SPROCKET
The RH auger chain drive, figure 11, is automatically tensioned by a spring loaded idler NYLON roller. The extension spring should extend 3/4" from its neutral 4" total length.
Manual adjustment for the automatic tensioning idler, NYLON roller assembly is located at the right front lower corner of the spreader tank.
COMPRESSION SPRING
The LH auger chain drive is automatically tensioned by a spring loaded heavy compression spring and tracking yoke/idler, NYLON roller assembly, figure
12.The one heavy compression spring should be compressed to
Manual adjustment for the automatic tensioning idler, NYLON roller assembly is located at the left front cor- ner of the spreader tank.
IDLER NYLON ROLLER
The side shaft chain drive (PTO input shaft to the side line shaft drive sprocket, figure 13) is automatically tensioned by a spring loaded idler NYLON roller. The extension spring should extend 2" from its neutral 5" to- tal length.
Manual adjustment for the automatic tensioning idler, NYLON roller assembly is located at the right front of the spreader’s front bearing mounting plate.
Model |