Meyer 3245, 3954, 2636 manual Daily Lubrication every 8-12 loads

Page 20

LUBRICATION

WARNING: DISCONNECT PTO DRIVE SHAFT AND HYDRAULIC HOSES (RELIEVE HYDRAULIC PRESSURE) BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.

DAILY LUBRICATION (every 8-12 loads)

Grease (2) rear spinner lower bearings. These bearings are grease line fitted to the LR frame channel of the spreader.

Oil (5) roller chain drives regularly at the front of spreader with light weight machine oil. The roller chains are accessible by opening the front steel shield- ing cover.

Grease PTO Drive line (9) places with Lithium grease every 8 hours.

IMPORTANT: GREASE 2 FITTINGS DAILY

Grease (4) bearings supporting the two large jack shaft reduction sprocket weldments on the front drive. The zerks are accessible by opening the front steel shielding cover and through the front bearing plate.

Grease (2) auger shaft bushings. These bearings are grease line fitted to the RF shield of the spreader. Grease Daily, Minimum of 10 pumps. Over greasing is not possible.

WEEKLY LUBRICATION (every 25-30 loads)

Grease (2) PTO input shaft bearings. These bear- ings are grease line fitted to the RF shield of the spreader.

Grease bearings on the RH side line shaft. The front bearing is zerk accessible through the RF steel shield- ing. The remaining rear bearings are located along the RH side of the spreader tank, zerks accessible through the steel shielding.

Grease (4) tandem wing pivots. Effectively grease by jacking up the spreader to relieve pressure points on the pivot shaft and tandem wing collar. Over greas- ing is not possible.

Grease (2) flow control rear gate and lifting arm pivot points. Grease gate pivot at center of flow control rear gate. Grease lifting arm pivot support at LR of spreader. Over greasing is not possible. Apply grease to slot in gate lift arm.

Grease (2) flow control rear gate slide guides. With the flow control rear gate opened, grease the slide guides from top side. Allow grease to lubricate flow control rear gate ends and slide guide surfaces. In freezing weather dump used motor oil down each slide guide once a week or more often if needed. Over greasing is not possible.

Grease (1) integral overrunning clutch at rear of the PTO drive line. The zerk is on the yoke of the clutch. Use Shell Super Duty or an equivalent lithium grease.

Check regularly for any observable lube leakage of the (3) gearboxes at the rear of the spreader. See L12 under Monthly Lubrication.

Model V-Max

—20—

Page 19 Page 21
Image 20
Page 19 Page 21
Contents MAX Twin Expeller Super Spreader Operators and Parts Manual no -7-V-MAXTable of Contents MANUFACTURER’S Warranty VIIIntroduction RememberSafety Precautions Study the Above Safety RulesSafety First Safety First PRE-OPERATION Drawbar & PTO RelationshipMaximum Spreader Load Weights TransportingTractor Towing Size Requirements LBS / CU. FTTruck Mount Spreaders Stalled to Retain the Connection beTween Tractor or Other Towing Vehicle Spreader Whenever Traveling onModel V-Max Unloading OperationLoading Optional Shear Sprocket IN- Structions Storage After USE DescriptionDrive Line Attachment Field Adjustment on the Cutout ClutchPTO Drive Line Normal Operation Maintenance InformationLubrication Adjustments Spinner Material GuidesSpring Loaded Adjuster Front Drive Roller ChainsIdler Nylon Roller RH Auger SprocketCompression Spring Lubrication Daily Lubrication every 8-12 loadsMonthly Lubrication Seasonal Lubrication Lubrication & Adjustment for Optional 3RD AugerAdjustments Instructions for Optional Automatic Chain Oiler Repair Parts Optional OIL-KITKEY OEM Part no Description Front Shield & Side Shaft Drive Front Shield & Side Shaft Drive Auger DRIVE, Primary Reduction KEY DescriptionAuger DRIVE, Secondary Reduction RH Auger DRIVE, Final Reduction RH Auger DRIVE, Final Reduction LH Auger DRIVE, Final Reduction LH Auger DRIVE, Final Reduction BOX, Augers & Side Shaft BOX, Augers & Side Shaft Unloading Gate & Trip PAN Doors KEY Description Spinners & Gearbox Shaft Drive KEY Description Spinner Gear Reducers HUBS, Axle & Tandem Axle Assembly KEY DescriptionOptional Third Auger KEY PTO Drive Shaft Assembly KEY Meyer Part DescriptionKEY Meyer Part no Description RPM-1-3/8, 21 Spline SP Standard PTO Drive Shaft Assembly PTO Drive Shaft Standard 540 or 1000 RPM PTO KEY Meyer Part DescriptionPTO Drive Shaft Assembly RPM KIT SVS-RPM-KIT KEY Description QTYMAX Highway Lighting Meyer Super Spreader Trouble Shooting Symptom Problem Solution AugersSymptom Problem Solution Roller Chains Meyer Super Spreader Maintenance Record Tire Size PLY PSI Meyer Equipment Wheel TorqueTire Inflation Meyer Super Spreader Specifications ModelModel V-Max Model V-Max Model V-Max

3245, 2636, 3954 specifications

Meyer 3954, 2636, and 3245 are notable models that showcase the brand's commitment to innovation, quality, and performance in the industry of advanced machinery and equipment. Each model is designed to cater to specific operational needs while incorporating cutting-edge technologies and user-friendly features.

The Meyer 3954 model is engineered primarily for heavy-duty applications, making it ideal for industrial use. This model is equipped with a robust engine that delivers optimal power and efficiency. Its key features include a high payload capacity, advanced hydraulic systems for enhanced lifting capabilities, and modular components that simplify maintenance. Furthermore, the intuitive control interface allows operators to manage tasks with precision, improving productivity and reducing operational downtime.

Moving on to the Meyer 2636, this model is tailored for versatility and agility, making it suitable for both indoor and outdoor applications. The compact design allows for easy maneuverability in tight spaces, while the advanced tracking system ensures stability and safety in various environments. The 2636 model is equipped with energy-efficient technology, significantly reducing operational costs while minimizing the environmental impact. Its user-centric design includes ergonomic controls that promote ease of use for operators.

Lastly, the Meyer 3245 stands out for its advanced technological integrations. This model features smart connectivity options, enabling real-time monitoring and diagnostics through a dedicated mobile application. Operators can access key performance metrics, receive alerts for maintenance needs, and optimize operational efficiency from anywhere. The 3245 also boasts enhanced safety features such as collision avoidance systems and automatic shutoff capabilities, making it one of the safest options in its class.

In conclusion, the Meyer 3954, 2636, and 3245 models exemplify the brand's dedication to delivering high-performance machinery tailored to diverse operational requirements. With their respective strengths, these models integrate advanced features and technologies that cater to both industrial and commercial applications, ensuring efficiency, safety, and reliability. As industries continue to evolve, Meyer remains at the forefront, providing innovative solutions that meet the challenges of modern operations.
Top Page Image Contents