Table of Contents
Section 2: Assembly &
Land Pride
Small Seeds Drive Assembly
Refer to Figure 1-8:
1.Place decal “Danger Guard Missing” (#17), “Danger Moving Parts” (#18) and “Seed Rate Chart” (#19) in locations shown (beneath lid).
2.Assemble chain guard mounts (#5) with the 1/4” flange bolts (#7) and flange nuts (#10). Do not tighten until the complete drive has been assembled and the chain guard (#15) installs properly. The chain guard mounts are slotted for easier chain guard mounting.
3.Install chain idler with welded on spacer (#2) and chain idler (#3) with 1/2” nut (#8).
4.Assemble the spacer (#4) and reduction sprocket assembly (#6) to the 5/8” welded on bolt with the 5/8” lockwasher (#11) and nut (#9).
5.Assemble the front roller sprocket (#12) and key (#1) to the front roller shaft.
6.Install chain (#14) first and then chain (#13).
7.Assemble chain guard (#15) with knobs (#16). Position chain guard mounts (#5) where needed and tighten hardware.
Small Seeds Drive Assembly
Figure
20608
12 PS2096 Series Primary Seeders | 4/03/08 |