Fluke 123, 124 user manual Safely Using the Test Tool

Page 11

Safely Using the Test Tool

Warning

To avoid electrical shock or fire:

•Use only the power supply, Model PM8907 (Battery Charger / Power Adapter).

•Before use check that the selected/indicated voltage range on the PM8907 matches the local line power voltage and frequency.

•For the PM8907/808 universal Battery Charger/Power Adapter use only line cords that comply with the local safety regulations.

Note

To accommodate connection to various line power sockets, the PM8907/808 universal Battery Charger / Power Adapter is equipped with a male plug that must be connected to a line cord appropriate for local use. Since the adapter is isolated, the line cord does not need to be equipped with a terminal for connection to protective ground. Since line cords with a protective grounding terminal are more commonly available you might consider using these anyhow.

Warning

To avoid electrical shock or fire if a Test Tool input is connected to more than 42 V peak (30 Vrms) or on circuits of more than 4800 VA:

•Use only insulated voltage probes, test leads and adapters supplied with the Test Tool, or indicated as suitable for the Fluke 123/124 Test Tool.

•Before use, inspect voltage probes, test leads and accessories for mechanical damage and replace when damaged.

•Remove all probes, test leads and accessories that are not in use.

•Always connect the battery charger first to the ac outlet before connecting it to the Test Tool.

•Do not connect the ground wire (Figure 1, item 5) to voltages higher than 42 V peak (30 Vrms) from earth ground.

•Do not apply input voltages above the rating of the instrument. Use caution when using 1:1 test leads because the probe tip voltage will be directly transmitted to the Test Tool.

•Do not use exposed metal BNC or banana plug connectors.

5

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Fluke 123/124 Limited Warranty & Limitation of Liability Service Centers Table of Contents Maintaining the Test Tool Tips and TroubleshootingFluke 123/124 Iii Sample tests Declaration of ConformityManufacturer Statement of ConformityDescription Fluke Fluke 123/S Fluke 124/S Unpacking the Test Tool KitScopeMeter Test Tool Kit Safely Using the Test Tool Safely Using the Test Tool Max. Floating Voltage If Safety Features are ImpairedSpecified Goal of this Chapter Powering the Test ToolScreen After Reset Resetting the Test ToolChanging Backlight Screen Areas Reading the ScreenBasic Navigation Making Selections in a MenuInput B Looking at the Measurement ConnectionsInput a Screen After an Auto Set Displaying an Unknown Signal with Connect-and ViewMaking Measurements Measurement SetupHz and Vpp as Main Readings Touch Hold OFF appears on Freezing the ScreenHolding a Stable Reading Making a Relative Measurement Making Relative MeasurementsChanging the Amplitude Selecting Auto/Manual RangesChanging the Graphic Representation on the Screen Changing the Time BaseOn the screen Positioning the Waveform on the ScreenObserve that the trigger identifier moves horizontally 11. Smoothing the Waveform Smoothing the Waveform12. Displaying the Envelope of a Waveform Displaying the Envelope of a WaveformStarting a TrendPlot function TrendPlotting a WaveformMaking a Single Acquisition Acquiring the WaveformChanging the TrendPlot Reading Turning Off the TrendPlot Display14. Making a Single Acquisition 15. Recording Waveforms over Longer Period of Time Recording Slow Signals over a Long Period TimeReversing the Polarity of the Displayed Waveform Selecting AC-CouplingTriggering on a Waveform Setting Trigger Level and SlopeSelecting the Trigger Parameters 17. Isolated Triggering Isolated Triggering Triggering on Video Signals18. Measuring Video Signals Triggering on a Specific Video Line Saving Screens with Belonging Setups Saving and Recalling a Setup and a ScreenRecalling Screens and Setups Deleting Screens and Associated Setups Making Cursor Measurements Using Horizontal Cursors on a WaveformHighlight the left cursor Using Vertical Cursors on a Waveform21. Risetime Measurement with Cursors Making Rise Time MeasurementsProbe Attenuation Using the 101 Probe for High Frequency MeasurementsProbe Adjustment Using a Printer22. Connecting a Serial Printer Using The Test Tool Using FlukeView Software Using FlukeView Software24. Connecting a Computer Storing the Test Tool Cleaning the Test ToolAbout this Chapter Charging the Battery Pack Charging the Rechargeable Battery PackKeeping Batteries in Optimal Condition Replacing the Battery Pack Replacing and Disposing of the Rechargeable Battery PackAdjusting Scope Probes Using and Adjusting 101 Scope ProbesFluke 123/124 Calibrating the Test Tool Parts and AccessoriesStandard Accessories Ordering Code Maintaining the Test Tool SW90W Optional AccessoriesUsing the Tilt Stand Using the Tilt StandChanging the Information Language Contrast Changing the DisplayChanging Date and Time Setting the Power Down Timer Saving Battery LifeChanging the Auto Set Options Potential Using Proper GroundingAll connections to COM are at the same Battery Testing of Fluke Accessories Solving Printing and Other Communication ErrorsEnvironmental Data Performance CharacteristicsSafety Characteristics IntroductionRise Time Input Impedance Dual Input OscilloscopeVertical Frequency ResponseTrigger HorizontalAuto Set Advanced Scope FunctionsDisplay Modes Input a and Input B Dual Input MeterDecibel dB PhaseDuty Cycle Duty Pulse Width PulseCapacitance CAP Ohm ΩContinuity DiodeAdvanced Meter Functions Cursor readout FlukeMemory PowerMiscellaneous DisplayEnvironmental SafetyVoltage Probe BB120 and STL120Disturbance less than 10% of full scale = 3 V/m = 10 V/m VDC, VAC, VAC+DC Index Fluke 123/124 Index Temperature, Environmental

124, 123 specifications

The Fluke 123 and 124 are part of Fluke's innovative range of handheld oscilloscopes designed for electrical and industrial maintenance professionals. These devices combine oscilloscopes with digital multimeter capabilities, making them invaluable tools for troubleshooting and maintenance tasks.

One of the standout features of the Fluke 123 and 124 is their ability to perform real-time waveforms and measurements. Equipped with a 2.5-inch color display, these oscilloscopes provide clear and detailed visualizations of electrical signals. The Fluke 123 offers a bandwidth of 20 MHz, while the Fluke 124 takes it a step further with a bandwidth of 40 MHz, making them versatile tools for various electrical applications.

Both models feature a unique "VPE" (Voltage, Period, and Edge) measurement capability, allowing users to capture electrical signals with precision. This feature is particularly useful in identifying signal distortions and voltage fluctuations, which can lead to equipment failures. Additionally, these devices come with various trigger functions, enabling users to analyze intermittent faults and complex signal behaviors effectively.

Another important characteristic of the Fluke 123 and 124 is their robust design. Built to withstand harsh working environments, they boast an IP51 rating for protection against dust and moisture. The ergonomic design ensures comfort during prolonged use, while the easy-to-navigate interface simplifies its operation.

In terms of battery life, both models are equipped with long-lasting rechargeable batteries, ensuring that users can operate them for extended periods without interruption. Furthermore, they offer storage capabilities for waveform captures, which can be later analyzed or shared with colleagues, enhancing collaboration during troubleshooting efforts.

The Fluke 124 also includes advanced features such as a built-in recording function, allowing users to log measurements over time. This is especially useful for monitoring electrical parameters in industrial processes and systems. Moreover, both models support various probes, giving users the flexibility to tackle different measurement scenarios.

In conclusion, the Fluke 123 and 124 are essential tools for professionals in the electrical and industrial sectors. Their combination of oscilloscope and multimeter functionality, robust design, and advanced measurement capabilities make them ideal for effectively diagnosing and troubleshooting a wide range of electrical issues. Whether it’s for routine maintenance or complex troubleshooting, these devices provide the accuracy and reliability necessary for today's demanding environments.
Top Page Image Contents