Gaggenau WS461710 installation instructions Following must be noted

Page 3

en

Ú

The following must be noted

Electrical connection

The appliance is fitted with a plug and must only be connected to a properly installed earthed socket. Only a qualified electrician who takes the appropriate regulations into account may install the socket or replace the connecting cable. If the plug is no longer accessible following installation, an all-pole isolating switch must be present on the installation side with a contact gap of at least 3 mm. Contact protection must be ensured by the installation. Fuse protection: 10 A. See instruction manual - technical data.

Fitted units

There must be a gap of at least 45 mm between the wall and the base of the unit, as well as between the wall and the rear wall of theunit above.

The ventilation slots and air intake points must not be covered. To ensure that they remain uncovered, also observe the installation instructions for the appliance above.

Installing the appliance

Connect the appliance to the mains. Then align the appliance flush with the units and screw it in place.

Note: Ensure that the connector lead does not become trapped or bent. After installation, the connector lead must not be in contact with the back or the base of the appliance.

After installation, the connector lead must not be in contact with the back or the base of the appliance.

fr

Þ

Consignes à respecter

Branchement électrique

L’appareil est livré prêt à brancher et doit être raccordé impérativement à une prise de courant de sécurité installée de manière réglementaire. Seul un électricien agréé est habilité à installer ou à déplacer une prise ou à changer le cordon de branchement, en respectant les prescriptions en vigueur. Si, après l’encastrement, la prise n’est plus accessible, un dispositif de coupure tous pôles avec un écartement des contacts d’au moins 3 mm doit être présent du côté installation. L’encastrement doit garantir la protection contre les contacts accidentels. Fusible : 10 A. Voir la notice d’utilisation - Caractéristiques techniques.

Meuble d'encastrement

Entre le mur et le fond du meuble ou bien la paroi arrière du meuble au-dessus il faut respecter une distance d'au moins 45 mm.

Les fentes d'aération et orifices d'aspiration ne doivent pas être couverts.

Pour cela, respecter également les instructions de montage de l'appareil situé au-dessus.

Encastrement de l'appareil

Raccorder l'appareil. Aligner l'appareil à fleur dans le fleur et le visser.

Remarque : Veiller à ne pas coincer ou plier le câble de raccordement.

Après l'encastrement, le câble de raccordement ne doit pas toucher la face arrière et le fond de l'appareil.

es

Û

Aspectos que se deben tener en cuenta

Conexión eléctrica

El aparato está listo para ser conectado y sólo debe conectarse a una toma de corriente con contacto de puesta a tierra instalada conforme a las instrucciones. La colocación de la toma de corriente o la sustitución de la línea de conexión solo puede llevarla a cabo un técnico electricista observando las instrucciones pertinentes. Si el enchufe queda inaccesible una vez concluido el montaje, la instalación deberá contar con un dispositivo separador omnipolar con una distancia de contacto de al menos 3 mm. La protección contra contacto manual debe garantizarse mediante el montaje. Fusible: 10 A. Ver Instrucciones de uso - Datos técnicos.

Mueble empotrado

Entre la pared y la base del armario o la pared de fondo del armario de arriba tiene que haber una distancia de por lo menos 45 mm.

No cubrir ni las aberturas de ventilación ni los orificios de aspiración.

Obsérvense a este respecto las indicaciones para el montaje del aparato en cuestión.

Instalación del aparato

Conectar el aparato. Colocar el aparato en el mueble a nivel y atornillarlo.

Nota: Vigilar que la línea de conexión no se doble o quede enganchada.

Una vez efectuado el montaje, la línea de conexión no debe tocar la parte posterior del aparato ni su base.

Image 3
Contents WS461710 PP Following must be noted

WS461710 specifications

The Gaggenau WS461710 is an exceptional wine cabinet designed for wine enthusiasts who appreciate quality and sophistication. This unit combines cutting-edge technology with elegant design, making it a must-have for serious collectors and casual drinkers alike.

One of the standout features of the WS461710 is its dual-zone temperature control, which allows users to store red and white wines at their optimal serving temperatures. With a temperature range of 5°C to 20°C, the cabinet ensures that each wine is preserved in conditions that maintain its flavors and aroma. The stainless-steel and glass door adds a modern touch while facilitating a clear view of the collection inside.

The WS461710 utilizes advanced thermoelectric cooling technology, which operates silently and effectively without a compressor. This not only contributes to a tranquil environment but also minimizes vibrations that could disturb the delicate sediments of aged wines. The cabinet's interior is equipped with adjustable wooden shelves that provide a robust yet gentle storage solution, accommodating bottles of various sizes, including standard Bordeaux and larger formats.

Humidity control is another key characteristic of the Gaggenau WS461710. The cabinet maintains optimal humidity levels between 50% and 70%, essential for preserving cork integrity and preventing spoilage. This is particularly important for long-term storage, as it ensures that wines age gracefully.

The LED lighting within the cabinet is another highlight; it gently illuminates the collection without generating heat, ensuring that the wines are not adversely affected. Additionally, the WS461710 comes with a built-in vibration absorber, further safeguarding your prized bottles from disturbances.

Security is also a priority, as the wine cabinet features a lockable door, deterring unauthorized access. Its elegant design and sleek finish allow it to blend seamlessly with any décor, enhancing the aesthetics of your living or entertainment space.

Overall, the Gaggenau WS461710 wine cabinet is a perfect union of form and function. With its superior temperature control, humidity management, and aesthetic appeal, it caters to the needs of wine connoisseurs while providing a stunning display for all. Its attention to detail and innovative technology make it an investment that can elevate any wine experience.