Meade ETX-90PE How to Create Your Own Guided Tour, What you will need, Tour Modes

Page 31

Note:

Meade’s AutoStar Suite provides an easy way for an observer to create their own Guided Tour. See

PHOTOGRAPHY WITH MEADE’S AUTOSTAR SUITE,

page 41, and also

OPTIONAL ACCESSORIES,

page 42, for more information.

3.Select a satellite from list and press ENTER.

4."Calculating...." and then "Tracking..." displays. If the satellite is going to make a pass, "Located" displays.

5.Use the Scroll keys to display data about the pass: aos – acquisition of signal and los – loss of signal. If you subtract the aos from the los, you can calculate how long the satellite will be visible. Location information also displays.

6."Alarm" displays after the location information. Press ENTER and AutoStar automatically sets the alarm to sound a minute before the satellite's scheduled appearance. You may return to regular observations until the alarm goes off.

7.When the alarm goes off, return to the Satellite menu and press a Scroll key until the desired satellite is on the top line of the display.

8.Press GO TO. AutoStar slews the telescope to where the satellite should appear. The motor drive stops and a countdown is displayed.

NOTE: If the scheduled appearance position of the satellite is obstructed (i.e., by a building, tree or hill), press ENTER and AutoStar starts to move the telescope along the expected satellite track. When the track clears the obstruction, press ENTER again to pause the telescope, then continue with this procedure.

9.With about 20 seconds left on the countdown timer, start watching through the telescope SmartFinder for the satellite to enter the field of view.

10.When the satellite enters the SmartFinder field of view, press ENTER. The telescope starts to track with the satellite.

11.Use the AutoStar Arrow keys to center the object in the SmartFinder, then look through the eyepiece to view the object.

Satellite orbits change and new satellites (including the Space Shuttle) are launched. Visit the Meade web site (www.meade.com) approximately once a month to get updated information and instructions on how to download this data to AutoStar. If orbital parameters are more than one month old, the satellite pass may not happen at the time predicted by AutoStar. Downloading requires the optional #505 AstroFinder™ Software and Cable Connector Kit. See OPTIONAL ACCESSORIES, page 42.

Note: Satellite observing is an exciting challenge. Most satellites are in low orbit, travelling at approximately 17,500 mph. When visible, they move quickly across the sky and are only in the field of view for a few minutes, requiring AutoStar to slew the telescope rapidly. Best viewing is near Sunrise or Sunset when the sky is still dark. Viewing in the middle of the night can be problematic because the satellite may pass overhead, but not be visible as it is in the Earth's shadow.

How to Create Your Own Guided Tour

When a Guided Tour is selected, AutoStar slews your telescope to a predetermined list of objects and displays information about each object, such as type of object, constellation location, R.A. and Dec coordinates and so forth. AutoStar contains a few Guided Tours which are programmed at the factory. But it is also possible for an observer to create a custom Guided Tour.

A tour is basically an ASCII text file that contains a list of directions and descriptions. Each line of a tour is either a comment line, a command line or a description.

What you will need:

A PC with text editor or word processing software installed (the tour must be saved as a "text only" or as a "MS-DOS text" file).

The Meade #505 Cable Connector Kit to download tour information to the AutoStar handbox.

Tour Modes

The objects chosen for a tour list are selected from AutoStar's database or by entering the object's RA and Dec coordinates. The tour is presented in one of two modes:

Automatic Mode: The title of an object appears on the first line and descriptive text scrolls on line 2.

31

Image 31
Contents ETX Premier Edition Telescope Series Page Contents QUICK-START Guide Enter Key Scroll Scroll Up Down B and Fig Telescope FeaturesSmartFinder? See Aligning Ascension and Declination setting circles? SeeTelescope Controls SmartfinderDefinitions Computer Control Panel see FigAlt/Az, Right Ascension, Tour the Cosmos with Just the Push of a Button Autostar FeaturesAutoStar to the topmost screen Select Item Object About changing slew ETX TipsHow to Assemble Your Telescope and Tripod Parts ListingGetting Started Aligning SmartFinder Using SmartFinderChoosing an Eyepiece Too Much Power?Terrestrial Observing Observing Using AutoStar Arrow KeysObserving Observing by Moving the Telescope ManuallyTo Track an Object Automatically Slew SpeedsAstronomical Observing Observe the MoonInitializing AutoStar for the First Time How to perform the Automatic Alignment procedureAutomatic Alignment Which One’s the Alignment Star? Observe a Star using the Automatic Tracking FeatureGo To Saturn Using the Guided TourTo Calculate Sunset time Autostar OperationAutostar AutoStar Navigation ExerciseLook into the Future Entering data into AutoStarSelect Item Object Autostars MenusObserving Satellites? See Object MenuObject Menu options include Use the Object menu to select an object from the databaseUse the Glossary menu Event MenuGlossary Menu Use the Event menuTips Utilities MenuSetup Menu Periodic Error Correction? See Tip Shift Adding and editing sites? SeeTo Edit a Site Advanced Autostar OperationAdding Observing Sites To Add a Site to the user-defined site listObserving Satellites Using AutoStar to Find Objects Not in the DatabaseTo GO to a user-entered object What you will need How to Create Your Own Guided TourTour Modes Comment Line Command LineWriting a Tour Moon Downloading Tours LandmarksTo perform a Landmark Survey IdentifyTo Add a landmark to the database To Select a landmark from the databaseDisplayed information Example Advanced Alt/Az AlignmentTwo-Star Alt/Az Alignment and Easy Align One-Star Alt/Az Alignment Smart Drive Training Periodic Error CorrectionPEC Train Menu Option Browse PEC Update Menu OptionPEC Erase Menu Option Photography with a 35mm Camera PhotographyPhotography with a Digital Camera Few Tips on PhotographyDeep Sky Imager Photography with Meade’s AutoStar Suite#505 Cable Connector Kit With Meade AstroFinder Optional Accessories#932 45 Erecting Prism Maintenance Storage and Transport TroubleshootingInspecting the Optics Telescope does not track a celestial object Meade Customer ServiceSpecifications ETX-90PE Astro Telescope SpecificationsSpecifications ETX-105PE Astro Telescope Specifications ETX-125PE Astro Telescope Telescope dimensions 43cm x 25cm x 20cm 17 x 10 xAutoStar Dimensions AutoStar SpecificationsCelestial Coordinates Equatorial AlignmentLoosen control latch Set latitude Locating Polaris City Country Latitude Appendix B Latitude ChartLatitude Chart for Major Cities of the World City State/Prov./Country LatitudeFurther Study Appendix C Training the DriveTo replace the battery Appendix Dchanging the LNT Module BatteryAutoStar Glossary Appendix Ebasic AstronomyMoon Deep-Sky Objects PlanetsPage Meade Limited Warranty

ETX-90PE specifications

The Meade ETX-90PE is a well-regarded telescope that combines portability and performance, making it a popular choice among both amateur astronomers and seasoned stargazers. Its compact design and advanced features make it an ideal instrument for those who seek to explore the night sky with ease.

At the heart of the ETX-90PE is its Maksutov-Cassegrain optical design, which utilizes a spherical primary mirror and a corrector lens to deliver exceptional image quality. With a focal length of 1250mm and a 90mm aperture, it strikes a balance between light-gathering ability and magnification, allowing users to observe celestial objects such as planets, star clusters, and distant galaxies in remarkable detail. The telescope's focal ratio of f/13.9 provides crisp and sharp views, making it particularly well-suited for planetary observation.

One of the standout features of the ETX-90PE is its Electronic Control System (ECS), which allows for easy and intuitive operation. The telescope is equipped with a built-in AutoStar Computerized GoTo mount, enabling users to locate and track over 30,000 celestial objects with just a few simple commands. With automatic alignment features, even beginners can get started quickly, making the wonders of the universe accessible to everyone.

Portability is a key characteristic of the Meade ETX-90PE. Weighing in at a mere 12.5 pounds, it can be easily transported to dark sky locations. Its compact design not only translates to ease of transport but also means it can be stored conveniently when not in use. The included sturdy aluminum tripod provides stable support, even during extended observation sessions.

The ETX-90PE further enhances the user experience with its high-quality accessories. It comes with a set of eyepieces, including a 26mm Super Plössl and a 9.7mm Plössl, allowing for various magnifications to suit different observing preferences. The telescope also features a built-in flip mirror, allowing for easier viewing through both the eyepiece and a camera, making astrophotography more accessible.

Additionally, the ETX-90PE is designed with user comfort in mind. The telescope offers adjustable slow-motion controls for fine-tuning views and an optical finder scope to help locate objects before zooming in. With robust construction, excellent optics, and a range of advanced features, the Meade ETX-90PE stands out as a versatile, high-quality telescope for both casual observers and serious astronomers alike. Its combination of technology and user-friendly functions makes it an enduring favorite for anyone looking to embark on a journey through the cosmos.