Meade instruction manual Photography with the LX90, Few tips on photography with the LX90

Page 39

2 1

3

Fig. 14: LX90 with #62 T-Adapter.

Fig. 15: Example of vignetting.

PHOTOGRAPHY WITH THE LX90

Photography through the LX90 requires the addition of the optional #62 T–Adapter. See “OPTIONAL ACCESSORIES,” page 39. With the #62 T-Adapter and a T-mount attached to the telescope (Fig. 14), through-the-telescope photography is possible with any 35mm camera body with a removable lens. In this way, the telescope effectively becomes the lens of the camera.

The #62 T-Adapter (1, Fig. 14) threads on to the photo port, followed by a T-Mount (2, Fig. 14) for the particular brand of 35mm camera being used, followed by the camera body (3, Fig. 14).

To orient an object in the viewfinder of the 35mm camera body, use a small jeweler’s screwdriver to slightly loosen three adjustment screws around the outer knurled ring of the T-Mount. Rotate the camera body to achieve proper orientation of the object; then re-tighten the adjustment screws.

The #62 T–Adapter permits close-coupling of a camera body to the telescope. In this format vignetting occurs: the photographic image appears on film with a slight darkening (vignetting) at the corners of the 35mm frame (Fig. 15).

Photography through a long lens such as the LX90 requires special technique for good results, and the photographer should probably expect to waste a roll or two of film in acquiring this technique. Long-lens photography has its own rewards, however, rewards that short-focus lens- es cannot duplicate.

A few tips on photography with the LX90:

1.Use the Field Tripod for the telescope. At an effective focal length of 2000mm, even small external vibrations can easily ruin an otherwise good photo.

CAUTION: With the #62 T-Adapter and a camera body mounted to the LX90 photo port, the telescope can only be rotated vertically about 45°. Moving past this point may damage the telescope and camera.

2.Use a cable-operated shutter release. Touching the camera body to initiate shutter operation almost certainly introduces undesirable vibrations.

3.Focus the image with extreme care. While observing the subject through the camera’s reflex viewfinder, turn the telescope’s focus knob (8, Fig. 1) to achieve the sharpest possi- ble focus. Note that some 35mm cameras may have an optional focusing screen (available from the manufacturer) for use with a long telephoto lens. This screen provides a brighter and clearer image to focus, and is highly recommended.

4.Correct shutter speeds vary widely, depending on lighting conditions and film used. Trial- and-error is the best way to determine proper shutter speed in any given application.

NOTE: The camera used with your telescope may have an exposure meter that is still active when the standard lens is removed and the body is connected to the telescope with the T–Mount. If used for terrestrial photography, the camera meter should be acceptable. If used for astrophotography, the meter probably will not pro- vide good results since camera meters are not made to compensate for a dark sky.

5.Terrestrial photography through the LX90 is sensitive to heat waves rising from the Earth’s surface. Long distance photography is best accomplished in the early morning hours before the earth has had time to build up heat.

6.Photography of the Moon and planets through the LX90 can be especially gratifying, but points 1 through 4 should be particularly noted in this case. Lunar or planetary photography requires that the telescope be Polar aligned. See “APPENDIX A,” page 46.

Photography with a Digital Camera

Although digital cameras still cannot match the quality of images provided by traditional 35mm cameras, they provide some significant advantages to the casual astrophotographer: You do not have to develop the images (instant images), lower costs, computer and internet readiness. And because unwanted photos are easily discarded, they provide the freedom to experiment.

Digital cameras present some problems for the astrophotographer: Many models have lenses that cannot be removed, difficulties in attaching to a telescope, possible vignetting, lack manual focusing and shorter exposure times.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents LX90 Schmidt-Cassegrain Telescope Meade Schmidt-Cassegrain Optical System Contents QUICK-START Guide ON/OFF E D Telescope FeaturesPage To Attach the Handbox Holder Tour the Cosmos with Just the Push of a Button Autostar FeaturesTopmost screen Select Item Object Page Getting Started How to Attach the Tripod to the Telescope AssemblyPrecautionary notes for the tripod How to Assemble Your TelescopeChoosing an Eyepiece Using SmartFinderAligning the Viewfinder Aligning SmartFinderTerrestrial Observing Observing Using AutoStars Arrow KeysObserving Observing By Moving the Telescope ManuallyObserve the Moon Slew SpeedsInitializing AutoStar for the First Time Astronomical ObservingTo Track an Object Automatically Moving Through AutoStar’s MenusWhile it does so Observe a Star using the Automatic Tracking FeatureHow to perform the Automatic Alignment procedure Automatic AlignmentGo To Saturn Using the Guided TourAutoStar Navigation Exercise Basic Autostar OperationEntering Data into AutoStar Navigating AutoStarTo Calculate Sunset time Select Item Object AUTOSTAR’S MenusObject Menu Menus and Menu OptionsEvent Menu Glossary MenuUtilities Menu Observing Considerations Setup Menu Time Zone Shift Menu Daylight SAVING, To Edit a Site Advanced Autostar FeaturesAdding Observing Sites To Add a Site to the user-defined site listUsing AutoStar to Find Objects Not in the Database To GO to a user-entered object Observing SatellitesTour Modes How to Create Your Own Guided TourCommand Line What you will needTitle Writing a TourPick END To Select a landmark from the database LandmarksDownloading Tours To Add a landmark to the databaseTo check on the available amount of memory in AutoStar IdentifyAdvanced Alt/Az Alignment To perform a Landmark SurveyBrowse Two-Star Alt/Az AlignmentOne-Star Alt/Az Alignment Photography with the LX90 Few tips on photography with the LX90Photography with a Digital Camera Meade Deep Sky Imager Photography with Meade’s AutoStar SuiteUltra Wide Angle 8-elements Optional AccessoriesEyepiece Power 2x Barlow Super Plössl 4-elements Super Wide Angle 6-elements#62 T-Adapter Collimation MaintenancePage Meade Customer Service Inspecting the OpticsGauging the Movement of the Telescope LX90 Specifications AutoStar SpecificationsAutoStar Dimensions Celestial Coordinates Polar AlignmentEasy Polar Alignment Setting CirclesLocating the Celestial Pole AutoStar Polar AlignmentEquatorial Wedge Lining Up with the Celestial PolePrecise Polar Alignment Star Charts City State/Country Latitude Latitude Chart for Major Cities of the WorldCity State/Prov./Country Latitude City Country LatitudeAppendix C Training the Drive To replace the battery Appendix D Changing the LNT Module BatteryAutoStar Glossary Objects in SpaceMoon Deep-Sky Objects PlanetsPage Page Page Meade Limited Warranty
Top Page Image Contents