Meade LXD75 instruction manual How to Attach the Optical Tube to the Mount

Page 62

Screws at the back-end of the bracket

Slot

Groove

Locking Knobs

Fig. 54 Mounting the SC bracket and optical tube to the mount.

Screws at the back-end of the bracket

Fig. 55: Adjusting the balance of the optical tube when using heavy acces- sories.

APPENDIX E: MOUNTING THE MODEL SC-8 SCHMIDT- CASSEGRAIN OPTICAL TUBE

How to Attach the Optical Tube to the Mount

The LXD75 model SC-8 Schmidt-Cassegrain assembles and operates identically to all the other LXD75 models equipped with an Autostar handbox, with one exception: the optical tube is attached to the mount with a mounting bracket rather than the cra- dle ring assembly. The optical tube is shipped with the mounting bracket already attached. To attach the mounting bracket /optical tube assembly to the mount, perform the following steps.

1.Perform steps 1 through 6 as described in HOW TO ASSEMBLE YOUR TELESCOPE, pages 11 and 12.

2.Slide the mounting bracket into the cradle assembly mounting slot. For most applications, set the groove in the bracket next to the cradle locking knob, so that the bolt of the cradle locking knob will enter the groove when the knob is tight- ened. Tighten both the cradle locking knob and the secondary locking knob to a firm feel. See Fig. 54.

If you are using heavy accessories (such as a camera, microfocuser, etc.) on the back end of the tube, you may need to balance the tube differently to keep the tube from drifting downward: Slide the mounting bracket and tube forward, until the screws at the back end of the tray touch the mount. See Figs. 54 and 55. Then tighten the cradle locking knob and the secondary locking knob to a firm feel.

3.Continue the assembly with step 9 as described in HOW TO ASSEMBLE YOUR TEL- ESCOPE, page12, and complete all the subsequent steps. All other procedures are identical as described earlier in this manual.

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents LXD 75 -Series Telescopes Page Contents Telescope Features BC1 g f eD E F LXD75-SeriesYour Personal Window to the Universe $ Computer Control Panel see e LXD75 Tips Tour the Cosmos with Just the Push of a Button Autostar FeaturesFeatures Tip Accessories How to Assemble Your TelescopeTelescope Assembly Getting StartedViewfinder assembly Newtonian reflector models C D E F Balancing the TelescopeAligning the Viewfinder Choosing an EyepieceToo Much Power? Observing by Moving the Telescope ManuallyActivate the Arrow Keys Autostar Models Only Slew Speeds Autostar Models OnlyTracking Objects Setting the Polar Home PositionObserve the Moon 16bObserve a Star using the Automatic Tracking Feature Using Autostars GO to Capabilities Autostar Models OnlyMoving Through Autostar’s Menus Autostar Models Only Initializing Autostar Autostar Models OnlyTraining the Drive Autostar Models Only Easy Alignment Autostar Models Only Go To Saturn Autostar Models OnlyUsing the Guided Tour Autostar Models Only Planet Saturn is over 800 million miles from the EarthAutostar Navigation Exercise To Calculate Sunset timeEntering Data into Autostar Navigating AutostarAutostars Menus Select Item ObjectMenus Object MenuUtilities Menu Event MenuGlossary Menu LXD75-SeriesSetup Menu EnterObserving Considerations Setup Menu Daylight SAVING, Surf the Web To Edit a Site Adding Observing SitesTo Add a Site to the user-defined site list Using Autostar to Find Objects Not in the Libraries To GO to a user-entered objectTo Add a landmark to the database Observing SatellitesLandmarks To perform a Landmark Survey To Check on the Available MemoryTo Select a landmark from the database Photography with Meade’s Autostar Suite PhotographyFew tips on photography with the LXD75-Seriestelescopes Optional Accessories 10 f/4Series 4000 Photo-Visual Optional Autostar handbox for EC model users Maintenance General MaintenanceD e f g Page Defocused star images. Misaligned 1, 2, Aligned Page Page 4 Model SN-8AT, SN-8EC Specifications Specifications5 Model SN-6AT, SN-6EC Specifications 8 Model AR-6AT Specifications 10 f/4 Model SN-10AT Specifications9.3 Model AR-5AT, AR-5EC Specifications 10 Model SC-8AT Specifications 5 Model N-6EC SpecificationsMeade Customer Service Autostar SpecificationsAutostar Dimensions Inspecting the OpticsSetting Circles Appendix a Celestial CoordinatesOne-Star Polar Alignment Locating the Celestial PolePolar Alignment Two-Star Polar AlignmentEnhancement Methods Method #1 Three-Star Alignment Using AutostarPolar Alignment Viewfinder To perform the Three-Star AlignmentMethod 2 Axis Alignment Procedures Procedure #1 To correct for attitude misalignmentProcedure #2 To correct for elevation misalignment Position aMethod 3 Axis Alignment Using Autostar TipsPEC Train Menu Option Method #4 Smart Drive Training Periodic Error CorrectionPEC Update Menu Option PEC Erase Menu OptionCity State/Prov./Country Latitude Appendix C Latitude ChartLatitude Chart for Major Cities of the World City Country LatitudeAppendix D EC Handbox Slew Speeds To move the telescope using the Electronic ControllerModes of Operation Tracking Rates Changing the Polar Mode Optional Autostar Computer Controller for LXD75 EC UsersHow to Attach the Optical Tube to the Mount Mounting the SC bracket and optical tube to the mountObjects in Space Appendix F Basic AstronomyAutostar Glossary MoonPlanets Deep-Sky ObjectsFurther Study Page Meade Limited Warranty

LXD75 specifications

The Meade LXD75 series represents a remarkable range of telescopes designed for both amateur astronomers and advanced users seeking high-quality performance at an affordable price. Known for its robust construction and innovative technology, the LXD75 aims to provide a user-friendly experience while catering to the demands of stargazers looking for sophistication in their equipment.

One of the main features of the LXD75 is its advanced German equatorial mount, which provides exceptional stability and tracking accuracy. This mount is equipped with dual-axis servo motors facilitating smooth movements, making it easy to locate and follow celestial objects. The LXD75 also includes a built-in autostar system featuring a database of over 30,000 celestial objects, allowing users to effortlessly navigate the night sky with a push of a button.

The LXD75 series includes several models, each with different optical configurations to suit the preferences of various users. The telescopes come with either an achromatic refractor or Schmidt-Cassegrain optical design, providing clear and bright images. The Schmidt-Cassegrain models offer a compact design with a fast focal ratio, making them excellent for both astrophotography and visual observation.

In terms of build, the Meade LXD75 features high-quality optics with multi-coated lenses, reducing glare and enhancing light transmission. This results in sharper and brighter images, making it easier to observe delicate details on planets, the moon, and deep-sky objects. The telescope tubes are crafted from durable materials, ensuring longevity and resilience against the elements.

Another characteristic worth noting is the ease of setup and operation. The LXD75 mount comes equipped with adjustable legs and can be easily assembled, requiring minimal tools. The intuitive control system also features a user-friendly interface, allowing both novices and experienced astronomers to operate the telescope with confidence.

For astrophotography enthusiasts, the LXD75 provides excellent support, with a wide range of accessories available to enhance imaging capabilities. The mount can accommodate various cameras, providing flexibility for capturing stunning astronomical photographs.

In summary, the Meade LXD75 series delivers a robust combination of features, technologies, and characteristics designed to meet the needs of both amateur and advanced astronomers. With its reliable mount, quality optics, and ease of use, the LXD75 ensures that stargazers can enjoy the wonders of the universe with clarity and precision.
Top Page Image Contents