Continuous Playback between CD and Tape
In the Continuous Playback mode, once either the CD player or cassette deck fin- ishes (or stops) playback, the other starts playback automatically.
1.Press
"TAPE" and "CD" blink in the display.
2.(For example) Press the CD PLAY (å) button.
The CD player starts playback. "CD" blinks in the display.
3.When the CD player stops, the cassette deck automatically starts playback. "TAPE" blinks in the display.
Afterward, when one stops, the other starts.
ORegardless of whether one machine (CD player or cassette deck) is stopped forcibly by pressing the STOP (∑) button or automatically at the end of playback, the other machine starts playback.
OYou may change the CD or tape while it is in the Stop mode.
OTo release the Continuous Playback mode, press the
Timer-controlled Operation
The unit has a timer controlled function. | Timer Connection |
This lets you start playback or recording |
|
operations at any desired time when an |
|
optional audio timer is used. |
|
∑Timer playback of CD or cassette
1. Connect the unit and your stereo system to an audio timer as shown in the dia- gram.
2. Set the power switches of all compo- nents to ON.
3. Load a disc or a prerecorded cassette.
4. Set the timer switch to the CD or TAPE position.
5. Set the audio timer to the required start (power on) and stop (power off) times. When this setting is completed, the power to all components will be switched off.
6. When the preset start time is reached, power will be supplied and playback will start automatically.
∑Timer recording
1. Select the amplifier's input which this deck is capable of recording.
2.Select the source to be recorded (FM, AM, etc.).
3.Load a recordable cassette and set the [TIMER] switch to [REC].
4.Set the audio timer to the required start (power on) and stop (power off) times. When this setting is completed, the power to all components will be switched off.
5.When the preset start time is reached, power will be supplied and recording will start automatically.
_ 14 _