Tascam CD-A700 user service Before Use

Page 4

Before Use

Read This Before Operating

OChoose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibra- tions and excessive dust, heat, cold or moisture. Keep away from such sources that hum, such as transformers or motors.

ODo not open the cabinet as this might result in damage to the circuitry or elec- trical shock. If a foreign object should get into the set, contact your dealer.

OWhen removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.

OBe sure not to handle discs with dirty fingers. Never insert a disc which has a crack on the surface.

ODo not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

OKeep this manual in a safe place for future reference.

Handling the Discs

This unit has been designed specifically for reproduction of compact discs bearing the "˛" mark. No other discs can be repro- duced.

OAlways place the compact disc in the disc tray with the label facing upward. (Compact discs can be played only on one side.)

OTo remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

How to remove the disc

How to hold the disc

Remote Control Unit

When operating the remote control unit, point it towards the remote sensor on the front panel of the unit.

ªBattery installation

1.Remove the battery compartment cover.

2.Insert two “AA” (R6, SUM-3) dry

batteries.

Make sure that the batteries are inserted

with their positive ≠ andneg- ative – poles positioned correctly.

3. Close the cover until it clicks.

Handling the Tapes

Do not store tapes in the following places:

‚On top of heaters, exposed to direct sun-

light or in any other places with high temperatures.

ONear speakers, on TV sets or amplifiers or where they would be exposed to strong magnetic fields.

OWhere humidity is high and in dirty, dusty places.

OAvoid dropping or subjecting cassettes to excessive shocks.

OAs C-120 tapes are physically weak and could become entangled in the transport mechanism, do not use them.

Cassette Tape

Tape selection:

For the automatic tape select function to work properly, metal and chrome (cobalt) tapes must have identification holes.

*Dolby noise reduction manufactered under license from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol ∂are trademarks of Dolby Laboratories Licensing Corporation.

OFingerprints and dust should be careful- ly wiped off the disc's recorded surface with a soft cloth.

Wipe radially

ODo not use thinner, benzine or alcohol as they damage the surface of the disc's plastic surface.

ODiscs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to "skip."

ODo not expose discs to direct sunlight or high humidity and temperature for extended periods.

Long exposure to high temperatures can warp the disc.

ODo not stick paper or write anything with a ballpoint pen on the surface of the label side.

Battery replacement

If you notice that the distance between the remote control unit and the unit for correct

operation becomes shorter, it indicates that the batteries are exhaust- ed. In this case replace the batteries with new ones.

Precautions concerning batteries

OBe sure to insert the batteries with correct positive ≠ and negative – polarities.

OUse batteries of the same type. Never use different types of batteries together.

ORechargeable and non-rechargeable

batteries can be used. Refer to the pre- cautions on their labels.

OWhen the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compart- ment and replace the batteries with new ones.

ODo not heat or disassemble batteries and never dispose of old batteries by throwing them in fire.

_ 4 _

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CD-A700 Important Safety Instructions Ocaution Label required in this regulation is shownWavelength 760 800nm Before Use Connections Voltage ConversionRack Mounting Digital OutputJReverse mode switch REV Mode kTape Pitch Control knob Name of Each ControlWCD Sync button eRECORD button rREC Mute button AREPEAT 1/ALL button sPROGRAM button dSHUFFLE button∑ Music search using Search buttons /Ò CD PlayerBasic Operation ∑ Even if the disc tray is open∑ To review the program contents ∑ To cancel a programmed trackProgram Playback ∑ Programming required tracks∑ To repeat a designated section A-B Repeat mode Random PlaybackRepeat Function Pitch ControlTime Counter Display Auto SpacingSingle Playback Intro Check FunctionCassette Deck Operation PlaybackRecording ErasingRTZ Return To Zero Function Fast WindCPS Computomatic Program Search  button is pressed, the current tune is counted asPress the CD Sync button in the Stop mode Copying from CD to Tape∑ To record from the beginning of the tape ∑ To record from any desired posi- tion of the tapeTimer-controlled Operation ∑ Timer playback of CD or cassette∑Timer recording Afterward, when one stops, the other startsTroubleshooting GeneralCD player Cassette deckMaintenance SpecificationsAC Power Cord Connection Corde DE Connexion CA

CD-A700 specifications

The Tascam CD-A700 is an innovative professional audio player that combines a CD player and a cassette deck into a single unit, making it an ideal solution for musicians, DJs, and audio engineers. This versatile device is designed to cater to a wide range of audio playback needs, providing high-quality sound and user-friendly features.

One of the main highlights of the CD-A700 is its ability to play standard audio CDs, as well as MP3 CDs, allowing for greater flexibility in terms of playback options. This feature is particularly beneficial for those who wish to access a large library of music without the need for multiple physical CDs. Its compatibility with CD-R and CD-RW formats further enhances its functionality, making it an invaluable tool for anyone who regularly uses optical media.

In addition to its CD capabilities, the Tascam CD-A700 also includes a built-in cassette deck, allowing users to play and record cassette tapes. This feature appeals to both nostalgia and practical use, as it permits the preservation of older audio recordings while integrating seamlessly into modern digital workflows. The cassette deck is equipped with a full auto-reverse function, enabling continuous playback without needing to manually flip the tape.

The device boasts several connectivity options, including RCA outputs, balanced XLR outputs, and a headphone jack, providing various ways to integrate it with existing audio equipment. The front panel features intuitive controls, including a large LCD display that offers clear track and time information, ensuring that users can navigate their audio smoothly.

In terms of audio quality, the CD-A700 uses advanced digital circuitry to ensure that sound reproduction is clear and precise. It supports high-resolution audio and features a range of audio effects, such as pitch control and variable speed playback, which can be invaluable for musicians and sound engineers alike.

Other notable features include the ability to create and save playlists directly on the device, as well as a remote control for convenient operation. The robust build quality of the Tascam CD-A700 ensures durability for frequent use in various settings, whether it be in a studio, live performance, or a home audio setup.

In summary, the Tascam CD-A700 stands out as a multifunctional audio solution that combines traditional and modern playback capabilities, making it a must-have for any audio professional or casual listener looking for a reliable and feature-rich audio player.
Top Page Image Contents