Tascam CD-A700 Program Playback, ∑ Programming required tracks, ∑ To review the program contents

Page 8

Program Playback

The program playback function allows you to program up to 20 tunes (tracks) for play- back in any desired order.

∑Programming required tracks

Example

To program tracks in the order 5 @2 @ 8 in the Stop mode.

1.Press the STOP (∑) button.

2.Press the PROGRAM button.

The player enters the Program mode. The PGM indicator lights in the display.

3.Alternately press the Ú SKIP Æ button(s) and the PROGRAM button in the following order.

4.Press the CD PLAY (∏) button. Programmed playback starts from the first programmed track.

OProgramming tracks is possible only when the player is in the Stop mode.

OThe programmed contents will be held in memory even after programmed play- back has been completed or when pro- grammed playback is stopped by press- ing the STOP (∑) button.

OWhen the STOP (∑) button is pressed in the stop mode, the contents of the pro- gram are erased.

OTo release the program mode, press the PROGRAM button again.

ODuring program playback, the TOTAL REMAIN time display shows the total remaining time of the programmed tracks, from the current position.

OIf a track with a number higher than 32 is being played, the remaining time will not be displayed in the time counter even when the TIME button is pressed. Instead, "nn:nn" will be indicated on the time indicator.

∑To display the total program time

In the Program mode, press the TIME but- ton to display the total program time. Pressing the TIME button again will return the CD player to the Program mode.

∑To review the program contents

1.Press the CHECK button in the Program mode.

The first programmed track number will light and "P-01" will blink in the display.

2.Each time the CHECK button is pressed, the next programmed track number will light.

"P-XX (Program number)" will blink in the display.

OWhen the last programmed track num- ber is displayed, pressing the CHECK button will return the CD player to the Program mode, allowing you to add tracks to the program.

OThe track numbers stored in the pro- gram memory will be displayed on the music calendar. However, please note that the calendar can handle only up to track 20. If higher track numbers are entered in the Program memory, the OVER indicator will light.

∑To cancel a programmed track

Pressing the CLEAR button will cancel the last programmed track.

∑Delete programming

This is the opposite to normal pro-gram- ming, and is used to program tracks which are not to be played. Use it when there are tracks on the disc you don't want to listen to.

1.Press the STOP (∑) button.

2.Press the DELETE button.

The CD player enters the Delete Program mode.

The "DELETE" and "PGM" indicators light in the display.

3.Alternately press the Ú SKIP Æ button(s) and the PROGRAM button in any desired order.

4.Press the CD PLAY (∏) button. Delete-programmed playback starts.

OIn the Delete-Program mode, pressing the TIME button will display the total time of the non-deleted tracks. Pressing the TIME button again will return the player to the Delete-Program mode.

OPressing the CHECK button in the Delete-Program mode will display the first deleted track number.

Each time the CHECK button is pressed, the next deleted track number will be displayed. When the last deleted track number is displayed, pressing the CHECK button will return the player to the Delete-Program mode, allowing you to delete other tracks.

OPressing the CLEAR button will cancel the last delete-programmed track.

OPressing the STOP (∑) button when the player is stopped will clear the delete- program memory.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CD-A700 Important Safety Instructions Wavelength 760 800nm Label required in this regulation is shownOcaution Before Use Connections Voltage ConversionRack Mounting Digital OutputJReverse mode switch REV Mode kTape Pitch Control knob Name of Each ControlWCD Sync button eRECORD button rREC Mute button AREPEAT 1/ALL button sPROGRAM button dSHUFFLE button∑ Music search using Search buttons /Ò CD PlayerBasic Operation ∑ Even if the disc tray is open∑ To review the program contents ∑ To cancel a programmed trackProgram Playback ∑ Programming required tracks∑ To repeat a designated section A-B Repeat mode Random PlaybackRepeat Function Pitch ControlTime Counter Display Auto SpacingSingle Playback Intro Check FunctionCassette Deck Operation PlaybackRecording ErasingRTZ Return To Zero Function Fast WindCPS Computomatic Program Search  button is pressed, the current tune is counted asPress the CD Sync button in the Stop mode Copying from CD to Tape∑ To record from the beginning of the tape ∑ To record from any desired posi- tion of the tapeTimer-controlled Operation ∑ Timer playback of CD or cassette∑Timer recording Afterward, when one stops, the other startsTroubleshooting GeneralCD player Cassette deckMaintenance SpecificationsAC Power Cord Connection Corde DE Connexion CA

CD-A700 specifications

The Tascam CD-A700 is an innovative professional audio player that combines a CD player and a cassette deck into a single unit, making it an ideal solution for musicians, DJs, and audio engineers. This versatile device is designed to cater to a wide range of audio playback needs, providing high-quality sound and user-friendly features.

One of the main highlights of the CD-A700 is its ability to play standard audio CDs, as well as MP3 CDs, allowing for greater flexibility in terms of playback options. This feature is particularly beneficial for those who wish to access a large library of music without the need for multiple physical CDs. Its compatibility with CD-R and CD-RW formats further enhances its functionality, making it an invaluable tool for anyone who regularly uses optical media.

In addition to its CD capabilities, the Tascam CD-A700 also includes a built-in cassette deck, allowing users to play and record cassette tapes. This feature appeals to both nostalgia and practical use, as it permits the preservation of older audio recordings while integrating seamlessly into modern digital workflows. The cassette deck is equipped with a full auto-reverse function, enabling continuous playback without needing to manually flip the tape.

The device boasts several connectivity options, including RCA outputs, balanced XLR outputs, and a headphone jack, providing various ways to integrate it with existing audio equipment. The front panel features intuitive controls, including a large LCD display that offers clear track and time information, ensuring that users can navigate their audio smoothly.

In terms of audio quality, the CD-A700 uses advanced digital circuitry to ensure that sound reproduction is clear and precise. It supports high-resolution audio and features a range of audio effects, such as pitch control and variable speed playback, which can be invaluable for musicians and sound engineers alike.

Other notable features include the ability to create and save playlists directly on the device, as well as a remote control for convenient operation. The robust build quality of the Tascam CD-A700 ensures durability for frequent use in various settings, whether it be in a studio, live performance, or a home audio setup.

In summary, the Tascam CD-A700 stands out as a multifunctional audio solution that combines traditional and modern playback capabilities, making it a must-have for any audio professional or casual listener looking for a reliable and feature-rich audio player.
Top Page Image Contents