Meade LX90GPS instruction manual

Page 29

c.Custom: Allows entry of user-defined tracking rates.

JReverse L/R: Reverses the functions of the Left and Right Arrow keys (i.e., the Right key moves the telescope to the left).

JReverse UP/DOWN: Reverses the functions of the Up and Down Arrow keys (i.e., the Up key moves the telescope down).

JReverse L/R: Reverses the functions of the Left and Right Arrow keys (i.e., the Right key moves the telescope to the left).

JReverse UP/DOWN: Reverses the functions of the Up and Down Arrow keys (i.e., the Up key moves the telescope down).

JCalibrate Sensors: This menu allows you to improve your telescope's pointing accuracy to alignment stars. It calibrates to correct slight mechanical misalignment due to transport, vibration, or aging.

When this menu is selected, the telescope slews to Polaris. AutoStar then prompts you to center Polaris and to press ENTER. AutoStar uses the position of Polaris to fine tune the position of North and also for detecting level.

JQuiet Slew: Sets the maximum slew rate to 1.5° for quieter operation.

JMax Elevation: Allows you to enter a value in degrees that sets a limit as to how far the

optical tube can swing upward during a programmed slew. (Note that it does not prevent you from performing a manual slew past this limit.) This is useful when you have a camera or other peripheral attached to the telescope—you can prevent it from striking the telescope base.

JMin AOS (Acquisition of Signal): Allows you enter a value in degrees. This value represents the altitude at which your telescope begins to slew when acquiring a satellite track. This is useful when you are observing satellites, but a tall tree or building is obstructing the telescope. For example, you might begin to track the satellite at 15° altitude, instead of 5°. See OBSERVING SATELLITES, page 33, for more information about satellites.

JCalibrate Motor: If the telescope motors appear to have a problem, use this option to retest the motors before performing a Reset. This option is also used if an AutoStar unit is moved between telescopes, to match AutoStar to the new telescope. To calibrate the motors, select this option and press ENTER.

JSmart Drive: Allows you to perform periodic error correction (PEC) on the R.A. worm gear and can only be used with polar mounted telescopes. Must be performed with a high powered reticle (eg. 9mm). PEC Training for the the LX90 telescopes will take about 8 minutes. See PERIODIC ERROR CORRECTION, page 54 for more information.

JHigh Precision: If High Precision is turned on, when looking for a faint celestial object (i.e., a nebula or galaxy), AutoStar first slews to a nearby bright star and displays "ENTER to Sync." Center the star in the eyepiece, then press ENTER. At that point the telescope has a high precision alignment to that part of the sky and it then slews to the object that was originally requested.

Targets switches between Astronomical targets and Terrestrial targets. If "Astronomical" is selected, the telescope tracking motor is activated and any object you observe will remain centered in the eyepiece. If "Terrestrial" is selected, the tracking motor is turned off. To learn how to track an object automatically, see page 18.

Site provides access to several options including:

JSelect: Displays the currently selected observing site. Use the Scroll keys to cycle through all available sites (see ADD below). Press ENTER when the site you wish to select displays. Use this option when you move to a different geographic location.

JAdd: Allows you to add new observing sites to the database (up to six sites may be stored). Scroll through the list of Countries/States. Press ENTER when the site you wish to add displays. Then choose the desired city in the same manner.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents 10, 12 LX90GPS Schmidt-Cassegrain Telescopes Meade Schmidt-Cassegrain Optical System Contents QUICK-START Guide ON/OFF E D Telescope FeaturesComputer Control Panel LX90 Your Personal Window to the UniverseTo Attach the Handbox Holder Tour the Cosmos with Just the Push of a Button Autostar FeaturesTopmost screen Select Item Object Down, left, and right, at any Slew SPEEDS, page 17. Getting Started How to Attach the Tripod to the Telescope AssemblyPrecautionary notes for the tripod How to Assemble Your TelescopeChoosing an Eyepiece Using SmartFinderAligning the Viewfinder Aligning SmartFinderObserving Observing Using AutoStars Arrow KeysObserving By Moving the Telescope Manually Terrestrial ObservingObserve the Moon Slew SpeedsTo Track an Object Automatically Astronomical ObservingMoving Through AutoStar’s Menus To prepare your telescope for Automatic AlignmentImportant Tip Observe a Star using the Automatic Tracking FeatureGo To Saturn Using the Guided TourLX90 Tips Global Positioning System AutoStar Navigation Exercise Basic Autostar OperationTo Calculate Sunset time Entering Data into AutoStarNavigating AutoStar Select Item Object Menus and Menu OptionsObject Menu Utilities Menu Event MenuGlossary Menu Observing Considerations Setup Menu Page Delete Deletes a stored site from the database Adding Observing Sites Advanced Autostar FeaturesTo Add a Site to the user-defined site list To Edit a SiteUsing AutoStar to Find Objects Not in the Database To GO to a user-entered object Observing SatellitesCommand Line How to Create Your Own Guided TourWhat you will need Tour ModesTitle Writing a TourPick END Downloading Tours LandmarksTo Add a landmark to the database To Select a landmark from the databaseAlternate Alt/Az Alignments IdentifyTo perform a Landmark Survey To check on the available amount of memory in AutoStarEasy Two-Star Alignment How to perform the Easy Align ProcedureTwo-Star Alt/Az Alignment To Set the Home Position ManuallyBrowse One-Star Alt/Az AlignmentPhotography with a Digital Camera Photography with the LX90Few tips on photography with the LX90 Meade Deep Sky Imager Photography with Meade’s AutoStar SuiteEyepiece Power 2x Barlow Super Plössl 4-elements Optional AccessoriesSuper Wide Angle 6-elements Ultra Wide Angle 8-elements#62 T-Adapter Collimation MaintenancePage Gauging the Movement of the Telescope Meade Consumer Solutions ServiceInspecting the Optics 10 LX90 Specifications LX90 SpecificationsAutoStar Dimensions 12 LX90 SpecificationsAutoStar Specifications Celestial Coordinates Polar AlignmentLocating the Celestial Pole Setting CirclesAutoStar Polar Alignment Easy Polar AlignmentEquatorial Wedge Lining Up with the Celestial PolePrecise Polar Alignment Follow these steps City State/Prov./Country Latitude Latitude Chart for Major Cities of the WorldCity Country Latitude City State/Country LatitudeAppendix C Training the Drive Moon AutoStar GlossaryObjects in Space Deep-Sky Objects PlanetsPage Meade Limited Warranty

LX90GPS specifications

The Meade LX90GPS is a premium telescope that offers both amateur and seasoned astronomers a powerful and user-friendly platform for exploring the night sky. This telescope blends advanced technology with robust design, making it one of the preferred choices for stargazers around the globe.

One of the standout features of the LX90GPS is its Advanced Coma-Free (ACF) optics. This design minimizes spherical aberration and eliminates off-axis coma, ensuring sharp, high-contrast images across the entire field of view. Coupled with a large aperture of 8, 10, or 12 inches, users can enjoy stunning views of celestial objects including planets, galaxies, and nebulae.

The telescope is equipped with a fully automated GoTo system that simplifies the hunting of celestial objects. The built-in GPS makes for effortless location setting, locking onto satellites and positioning the telescope accurately. Once set up, users can access a database containing over 30,000 celestial objects, allowing for easy navigation and exploration.

In addition to its exceptional optics and GoTo capabilities, the LX90GPS features Smart Mount technology. This innovative system incorporates adjustments based on real-time sky data, ensuring that the telescope remains aligned with celestial bodies as they move across the night sky. The LX90GPS also includes a unique Auto-Alignment feature, where a simple two-star alignment procedure helps calibrate the telescope quickly and easily.

The design of the LX90GPS is user-centric, combining functionality with comfort. The telescope comes with an easy-to-operate control panel and a large, multi-line LCD screen that displays critical information. Users can easily manage various functions and settings without fumbling through complex menus.

Additional features include the option for removable optical tubes, allowing for easy upgrades or repairs. The telescope is compatible with a variety of Meade accessories, including focal reducers and filter sets, enhancing its versatility for different observing conditions.

In conclusion, the Meade LX90GPS stands out for its remarkable optics, user-friendly technology, and impressive range of features. Whether you’re gazing at the Moon, tracking planets, or delving into deep-sky observations, the LX90GPS provides a fulfilling astronomical experience that inspires exploration and delight in the universe.
Top Page Image Contents