Meade LX90GPS instruction manual Observing Satellites, To GO to a user-entered object

Page 33

9.AutoStar then prompts you to enter the magnitude of the object. This step is also optional. Use the Number keys to enter this information, if so desired, and press ENTER to go to the next display. "User Object: Add" displays again.

To GO TO a user-entered object:

In this procedure, you will choose an object from the User Object list and GO TO the object.

1.With "User Object: Add" displayed, press the Scroll Up key once. "User Object: Select" displays. Press ENTER.

2.Use the Scroll keys (if necessary) to scroll to the desired object. Press ENTER.

3.The name of the object and the Right Ascension and Declination coordinates display.

4.Press GO TO and the telescope slews to the object.

Observing Satellites

In this procedure, you will prepare your telescope to observe a satellite pass.

1.Navigate to the "Object: Satellite" menu option and press ENTER.

2.Use the Scroll keys to scroll through the list of satellites.

3.Select a satellite from list and press ENTER.

4."Calculating...." and then "Tracking..." displays. If the satellite is going to make a pass, "Located" displays.

5.Use the Scroll keys to display data about the pass: aos—acquisition of signal and los—loss of signal. If you subtract the aos from the los, you can calculate how long the satellite will be visible. Location information also displays.

6."Alarm" displays after the location information. Press ENTER and AutoStar automatically sets the alarm to sound a minute before the satellite's scheduled appearance. You may return to regular observations until the alarm goes off.

7.When the alarm goes off, return to the Satellite menu and press a Scroll key until the desired satellite is on the top line of the display.

8.Press GO TO. AutoStar slews the telescope to where the satellite should appear. The motor drive stops and a countdown is displayed.

NOTE: If the scheduled appearance position of the satellite is obstructed (i.e., by a building, tree, or hill), press ENTER and AutoStar starts to move the telescope along the expected satellite track. When the track clears the obstruction, press ENTER again to pause the telescope, then continue with this procedure.

9.With about 20 seconds left on the countdown timer, start watching through the telescope SmartFinder (1, Fig. 17) for the satellite to enter the field of view.

10.When the satellite enters the viewfinder field of view, press ENTER. The telescope starts to track with the satellite.

11.Use the AutoStar Arrow keys to center the object in the viewfinder, then look through the eyepiece to view the object.

Satellite orbits change and new satellites (including the Space Shuttle) are launched. Visit the Meade web site (www.meade.com) approximately once a month to get updated information and instructions on how to download this data to AutoStar. If orbital parameters are more than one month old, the satellite pass may not happen at the time predicted by AutoStar. Downloading requires the optional #505 AstroFinder™ Software and Cable Connector Kit. See OPTIONAL ACCESSORIES, page 43.

NOTE: Satellite observing is an exciting challenge. Most satellites are in low orbit, travelling at approximately 17,500 mph. When visible, they move quickly across the sky and are only in the field of view for a few minutes, requiring AutoStar to slew the telescope rapidly. Best viewing is near Sunrise or Sunset when the sky is still dark. Viewing in the middle of the night can be problematic because the satellite may pass overhead, but not be visible as it is in the Earth's shadow.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 10, 12 LX90GPS Schmidt-Cassegrain Telescopes Meade Schmidt-Cassegrain Optical System Contents QUICK-START Guide ON/OFF E D Telescope FeaturesComputer Control Panel LX90 Your Personal Window to the UniverseTo Attach the Handbox Holder Tour the Cosmos with Just the Push of a Button Autostar FeaturesTopmost screen Select Item Object Down, left, and right, at any Slew SPEEDS, page 17. Getting Started How to Attach the Tripod to the Telescope AssemblyPrecautionary notes for the tripod How to Assemble Your TelescopeChoosing an Eyepiece Using SmartFinderAligning the Viewfinder Aligning SmartFinderObserving Observing Using AutoStars Arrow KeysObserving By Moving the Telescope Manually Terrestrial ObservingObserve the Moon Slew SpeedsTo Track an Object Automatically Astronomical ObservingMoving Through AutoStar’s Menus To prepare your telescope for Automatic AlignmentImportant Tip Observe a Star using the Automatic Tracking FeatureGo To Saturn Using the Guided TourLX90 Tips Global Positioning System AutoStar Navigation Exercise Basic Autostar OperationEntering Data into AutoStar Navigating AutoStarTo Calculate Sunset time Select Item Object Menus and Menu OptionsObject Menu Event Menu Glossary MenuUtilities Menu Observing Considerations Setup Menu Page Delete Deletes a stored site from the database Adding Observing Sites Advanced Autostar FeaturesTo Add a Site to the user-defined site list To Edit a SiteUsing AutoStar to Find Objects Not in the Database To GO to a user-entered object Observing SatellitesCommand Line How to Create Your Own Guided TourWhat you will need Tour ModesTitle Writing a TourPick END Downloading Tours LandmarksTo Add a landmark to the database To Select a landmark from the databaseAlternate Alt/Az Alignments IdentifyTo perform a Landmark Survey To check on the available amount of memory in AutoStarEasy Two-Star Alignment How to perform the Easy Align ProcedureTwo-Star Alt/Az Alignment To Set the Home Position ManuallyBrowse One-Star Alt/Az AlignmentPhotography with the LX90 Few tips on photography with the LX90Photography with a Digital Camera Meade Deep Sky Imager Photography with Meade’s AutoStar SuiteEyepiece Power 2x Barlow Super Plössl 4-elements Optional AccessoriesSuper Wide Angle 6-elements Ultra Wide Angle 8-elements#62 T-Adapter Collimation MaintenancePage Meade Consumer Solutions Service Inspecting the OpticsGauging the Movement of the Telescope 10 LX90 Specifications LX90 Specifications12 LX90 Specifications AutoStar SpecificationsAutoStar Dimensions Celestial Coordinates Polar AlignmentLocating the Celestial Pole Setting CirclesAutoStar Polar Alignment Easy Polar AlignmentEquatorial Wedge Lining Up with the Celestial PolePrecise Polar Alignment Follow these steps City State/Prov./Country Latitude Latitude Chart for Major Cities of the WorldCity Country Latitude City State/Country LatitudeAppendix C Training the Drive AutoStar Glossary Objects in SpaceMoon Deep-Sky Objects PlanetsPage Meade Limited Warranty

LX90GPS specifications

The Meade LX90GPS is a premium telescope that offers both amateur and seasoned astronomers a powerful and user-friendly platform for exploring the night sky. This telescope blends advanced technology with robust design, making it one of the preferred choices for stargazers around the globe.

One of the standout features of the LX90GPS is its Advanced Coma-Free (ACF) optics. This design minimizes spherical aberration and eliminates off-axis coma, ensuring sharp, high-contrast images across the entire field of view. Coupled with a large aperture of 8, 10, or 12 inches, users can enjoy stunning views of celestial objects including planets, galaxies, and nebulae.

The telescope is equipped with a fully automated GoTo system that simplifies the hunting of celestial objects. The built-in GPS makes for effortless location setting, locking onto satellites and positioning the telescope accurately. Once set up, users can access a database containing over 30,000 celestial objects, allowing for easy navigation and exploration.

In addition to its exceptional optics and GoTo capabilities, the LX90GPS features Smart Mount technology. This innovative system incorporates adjustments based on real-time sky data, ensuring that the telescope remains aligned with celestial bodies as they move across the night sky. The LX90GPS also includes a unique Auto-Alignment feature, where a simple two-star alignment procedure helps calibrate the telescope quickly and easily.

The design of the LX90GPS is user-centric, combining functionality with comfort. The telescope comes with an easy-to-operate control panel and a large, multi-line LCD screen that displays critical information. Users can easily manage various functions and settings without fumbling through complex menus.

Additional features include the option for removable optical tubes, allowing for easy upgrades or repairs. The telescope is compatible with a variety of Meade accessories, including focal reducers and filter sets, enhancing its versatility for different observing conditions.

In conclusion, the Meade LX90GPS stands out for its remarkable optics, user-friendly technology, and impressive range of features. Whether you’re gazing at the Moon, tracking planets, or delving into deep-sky observations, the LX90GPS provides a fulfilling astronomical experience that inspires exploration and delight in the universe.
Top Page Image Contents