Meade LX90GPS instruction manual Photography with the LX90, Few tips on photography with the LX90

Page 41

2 1

3

Fig. 15: LX90 with #62 T-Adapter.

Fig. 16: Example of vignetting.

PHOTOGRAPHY WITH THE LX90

Photography through the LX90 requires the addition of the optional #62 T–Adapter. See OPTIONAL ACCESSORIES, page 43. With the #62 T-Adapter and a T-mount attached to the telescope (Fig. 15), through-the-telescope photography is possible with any 35mm camera body with a removable lens. In this way, the telescope effectively becomes the lens of the camera.

The #62 T-Adapter (1, Fig. 15) threads on to the photo port, followed by a T-Mount (2, Fig. 15) for the particular brand of 35mm camera being used, followed by the camera body (3, Fig. 15).

To orient an object in the viewfinder of the 35mm camera body, use a small jeweler’s screwdriver to slightly loosen three adjustment screws around the outer knurled ring of the T-Mount. Rotate the camera body to achieve proper orientation of the object; then re-tighten the adjustment screws.

The #62 T–Adapter permits close-coupling of a camera body to the telescope. In this format vignetting occurs: the photographic image appears on film with a slight darkening (vignetting) at the corners of the 35mm frame (Fig. 16).

Photography through a long lens such as the LX90 requires special technique for good results, and the photographer should probably expect to waste a roll or two of film in acquiring this technique. Long-lens photography has its own rewards, however, rewards that short-focus lens- es cannot duplicate.

A few tips on photography with the LX90:

1.Use the Field Tripod for the telescope. At an effective focal length of 2000mm, even small external vibrations can easily ruin an otherwise good photo.

CAUTION: With the #62 T-Adapter and a camera body mounted to the LX90 photo port, the telescope can only be rotated vertically about 45°. Moving past this point may damage the telescope and camera.

2.Use a cable-operated shutter release. Touching the camera body to initiate shutter operation almost certainly introduces undesirable vibrations.

3.Focus the image with extreme care. While observing the subject through the camera’s reflex viewfinder, turn the telescope’s focus knob (8, Fig. 1) to achieve the sharpest possi- ble focus. Note that some 35mm cameras may have an optional focusing screen (available from the manufacturer) for use with a long telephoto lens. This screen provides a brighter and clearer image to focus, and is highly recommended.

4.Correct shutter speeds vary widely, depending on lighting conditions and film used. Trial- and-error is the best way to determine proper shutter speed in any given application.

NOTE: The camera used with your telescope may have an exposure meter that is still active when the standard lens is removed and the body is connected to the telescope with the T–Mount. If used for terrestrial photography, the camera meter should be acceptable. If used for astrophotography, the meter probably will not pro- vide good results since camera meters are not made to compensate for a dark sky.

5.Terrestrial photography through the LX90 is sensitive to heat waves rising from the Earth’s surface. Long distance photography is best accomplished in the early morning hours before the earth has had time to build up heat.

6.Photography of the Moon and planets through the LX90 can be especially gratifying, but points 1 through 4 should be particularly noted in this case. Lunar or planetary photography requires that the telescope be Polar aligned. See APPENDIX A, page 50.

Photography with a Digital Camera

Although digital cameras still cannot match the quality of images provided by traditional 35mm cameras, they provide some significant advantages to the casual astrophotographer: You do not have to develop the images (instant images), lower costs, computer and internet readiness. And because unwanted photos are easily discarded, they provide the freedom to experiment.

Digital cameras present some problems for the astrophotographer: Many models have lenses that cannot be removed, difficulties in attaching to a telescope, possible vignetting, lack manual focusing and shorter exposure times.

41

Image 41
Contents 10, 12 LX90GPS Schmidt-Cassegrain Telescopes Meade Schmidt-Cassegrain Optical System Contents QUICK-START Guide ON/OFF E D Telescope FeaturesComputer Control Panel LX90 Your Personal Window to the UniverseTo Attach the Handbox Holder Tour the Cosmos with Just the Push of a Button Autostar FeaturesTopmost screen Select Item Object Down, left, and right, at any Slew SPEEDS, page 17. Getting Started How to Attach the Tripod to the Telescope AssemblyPrecautionary notes for the tripod How to Assemble Your TelescopeChoosing an Eyepiece Using SmartFinderAligning the Viewfinder Aligning SmartFinderObserving Observing Using AutoStars Arrow KeysObserving By Moving the Telescope Manually Terrestrial ObservingObserve the Moon Slew SpeedsTo Track an Object Automatically Astronomical ObservingMoving Through AutoStar’s Menus To prepare your telescope for Automatic AlignmentImportant Tip Observe a Star using the Automatic Tracking FeatureGo To Saturn Using the Guided TourLX90 Tips Global Positioning System AutoStar Navigation Exercise Basic Autostar OperationTo Calculate Sunset time Entering Data into AutoStarNavigating AutoStar Select Item Object Menus and Menu OptionsObject Menu Utilities Menu Event MenuGlossary Menu Observing Considerations Setup Menu Page Delete Deletes a stored site from the database Adding Observing Sites Advanced Autostar FeaturesTo Add a Site to the user-defined site list To Edit a SiteUsing AutoStar to Find Objects Not in the Database To GO to a user-entered object Observing SatellitesCommand Line How to Create Your Own Guided TourWhat you will need Tour ModesTitle Writing a TourPick END Downloading Tours LandmarksTo Add a landmark to the database To Select a landmark from the databaseAlternate Alt/Az Alignments IdentifyTo perform a Landmark Survey To check on the available amount of memory in AutoStarEasy Two-Star Alignment How to perform the Easy Align ProcedureTwo-Star Alt/Az Alignment To Set the Home Position ManuallyBrowse One-Star Alt/Az AlignmentPhotography with a Digital Camera Photography with the LX90Few tips on photography with the LX90 Meade Deep Sky Imager Photography with Meade’s AutoStar SuiteEyepiece Power 2x Barlow Super Plössl 4-elements Optional AccessoriesSuper Wide Angle 6-elements Ultra Wide Angle 8-elements#62 T-Adapter Collimation MaintenancePage Gauging the Movement of the Telescope Meade Consumer Solutions ServiceInspecting the Optics 10 LX90 Specifications LX90 SpecificationsAutoStar Dimensions 12 LX90 SpecificationsAutoStar Specifications Celestial Coordinates Polar AlignmentLocating the Celestial Pole Setting CirclesAutoStar Polar Alignment Easy Polar AlignmentEquatorial Wedge Lining Up with the Celestial PolePrecise Polar Alignment Follow these steps City State/Prov./Country Latitude Latitude Chart for Major Cities of the WorldCity Country Latitude City State/Country LatitudeAppendix C Training the Drive Moon AutoStar GlossaryObjects in Space Deep-Sky Objects PlanetsPage Meade Limited Warranty

LX90GPS specifications

The Meade LX90GPS is a premium telescope that offers both amateur and seasoned astronomers a powerful and user-friendly platform for exploring the night sky. This telescope blends advanced technology with robust design, making it one of the preferred choices for stargazers around the globe.

One of the standout features of the LX90GPS is its Advanced Coma-Free (ACF) optics. This design minimizes spherical aberration and eliminates off-axis coma, ensuring sharp, high-contrast images across the entire field of view. Coupled with a large aperture of 8, 10, or 12 inches, users can enjoy stunning views of celestial objects including planets, galaxies, and nebulae.

The telescope is equipped with a fully automated GoTo system that simplifies the hunting of celestial objects. The built-in GPS makes for effortless location setting, locking onto satellites and positioning the telescope accurately. Once set up, users can access a database containing over 30,000 celestial objects, allowing for easy navigation and exploration.

In addition to its exceptional optics and GoTo capabilities, the LX90GPS features Smart Mount technology. This innovative system incorporates adjustments based on real-time sky data, ensuring that the telescope remains aligned with celestial bodies as they move across the night sky. The LX90GPS also includes a unique Auto-Alignment feature, where a simple two-star alignment procedure helps calibrate the telescope quickly and easily.

The design of the LX90GPS is user-centric, combining functionality with comfort. The telescope comes with an easy-to-operate control panel and a large, multi-line LCD screen that displays critical information. Users can easily manage various functions and settings without fumbling through complex menus.

Additional features include the option for removable optical tubes, allowing for easy upgrades or repairs. The telescope is compatible with a variety of Meade accessories, including focal reducers and filter sets, enhancing its versatility for different observing conditions.

In conclusion, the Meade LX90GPS stands out for its remarkable optics, user-friendly technology, and impressive range of features. Whether you’re gazing at the Moon, tracking planets, or delving into deep-sky observations, the LX90GPS provides a fulfilling astronomical experience that inspires exploration and delight in the universe.