PC cam manual 6.07 Q6 6/11/07 11:53 AM Page 5
HOW TO RUN THE SOFTWARE
1.Insert the PC Camera's USB cable into the USB port on your PC.
2Go to the "Start" button on your PC. Then select "All Programs," followed by "USB" folder. Select the newly installed software. You'll find it in a folder named "USB 2.0
Camera." See Fig. 7
3
4 The software screen "Meade PC Camera" opens.
5You will see a live image of what the camera sees. If you're not connected to a telescope, you will just see fuzzy light or darkness. See Fig. 8
5
Fig. 7: Running the software. Select "Start," All Programs" and "Meade PC Camera."
Fig. 8: Fuzzy light or dark on
PC Camera screen.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.