Orion 9535, 9533, 9536 instruction manual Appendix a, Glossary of Terms

Page 23

Appendix A -

GLOSSARY OF TERMS

A-

Absolute magnitude: The apparent magnitude that a star would have if it were observed from a standard distance of 10 parsecs, or 32.6 light-years. The absolute mag- nitude of the Sun is 4.8. at a distance of 10 parsecs, it would just be visible on Earth on a clear moonless night away from surface light.

Airy disk: The apparent size of a star’s disk produced even by a perfect optical system. Since the star can never be focused perfectly, 84 per cent of the light will concentrate into a single disk, and 16 per cent into a system of sur- rounding rings.

Alt-Azimuth Mounting: A telescope mounting using two independent rotation axes allowing movement of the instrument in Altitude and Azimuth.

Altitude: In astronomy, the altitude of a celestial object is its Angular Distance above or below the celestial horizon.

Aperture: The diameter of a telescope’s primary lens or mir- ror; the larger the aperture, the greater the telescope’s light-gathering power.

Apparent Magnitude: A measure of the relative brightness of a star or other celestial object as perceived by an observer on Earth.

Arc minute: A unit of angular size equal to 1/60 of a degree.

Arc second: A unit of angular size equal to 1/3,600 of a degree (or 1/60 of an arc minute).

Asterism: A small unofficial grouping of stars in the night sky.

Asteroid: A small, rocky body that orbits a star.

Astrology: The pseudoscientific belief that the positions of stars and planets exert an influence on human affairs; astrology has nothing in common with astronomy.

Astronomical unit (AU): The distance between the Earth and the Sun. It is equal to 149,597,900 km., usually rounded off to 150,000,000 km.

Aurora: The emission of light when charged particles from the solar wind slams into and excites atoms and mole- cules in a planet’s upper atmosphere.

Azimuth: The angular distance of an object eastwards along the horizon, measured from due north, between the astronomical meridian (the vertical line passing through the center of the sky and the north and south points on the horizon) and the vertical line containing the celestial body whose position is to be measured. .

B -

Binary Stars: Binary (Double) stars are pairs of stars that, because of their mutual gravitational attraction, orbit around a common center of mass. If a group of three or more stars revolve around one another, it is called a mul- tiple system. It is believed that approximately 50 percent of all stars belong to binary or multiple systems. Systems with individual components that can be seen separately by a telescope are called visual binaries or visual multiples. The nearest “star” to our solar system, Alpha Centauri, is

actually our nearest example of a multiple star system, it consists of three stars, two very similar to our Sun and one dim, small, red star orbiting around one another.

C -

Celestial Equator: The projection of the Earth’s equator on to the celestial sphere. It divides the sky into two equal hemispheres.

Celestial pole: The imaginary projection of Earth’s rotational axis north or south pole onto the celestial sphere.

Celestial Sphere: An imaginary sphere surrounding the Earth, concentric with the Earth’s center.

Collimation: The act of putting a telescope’s optics into per- fect alignment.

D -

Declination (DEC): The angular distance of a celestial body north or south of the celestial equator. It may be said to correspond to latitude on the surface of the Earth.

E -

Ecliptic: The projection of the Earth’s orbit on to the celestial sphere. It may also be defined as “the apparent yearly path of the Sun against the stars”.

Equatorial mount: A telescope mounting in which the instru- ment is set upon an axis which is parallel to the axis of the Earth; the angle of the axis must be equal to the observer’s latitude.

F -

Focal length: The distance between a lens (or mirror) and the point at which the image of an object at infinity is brought to focus. The focal length divided by the aperture of the mirror or lens is termed the focal ratio.

J -

Jovian Planets: Any of the four gas giant planets that are at a greater distance form the sun than the terrestrial planets.

K -

Kuiper Belt: A region beyond the orbit of Neptune extending to about 1000 AU which is a source of many short period comets.

L -

Light-Year (ly): A light-year is the distance light traverses in a vacuum in one year at the speed of 299,792 km/ sec. With 31,557,600 seconds in a year, the light-year equals a distance of 9.46 X 1 trillion km (5.87 X 1 trillion mi).

M -

Magnitude: Magnitude is a measure of the brightness of a celestial body. The brightest stars are assigned mag- nitude 1 and those increasingly fainter from 2 down to magnitude 5. The faintest star that can be seen without a telescope is about magnitude 6. Each magnitude step corresponds to a ratio of 2.5 in brightness. Thus a star of magnitude 1 is 2.5 times brighter than a star of magni- tude 2, and 100 times brighter than a magnitude 5 star. The brightest star, Sirius, has an apparent magnitude of -1.6, the full moon is -12.7, and the Sun’s brightness,

23

Image 23
Contents Orion StarSeekers Star Pointer Finderscope Starseeker 80mm Refractor Telescope Parts Identification Collimation Adjustment KnobsIntroduction Table of ContentsParts List AssemblyAttaching the Telescope to the Tripod Accessory trayAssembling the StarSeeker UnderneathEyepiece FocusingInstalling the EZ Finder StarSeeker Focus knobAttaching the Hand Control Powering the StarSeekerHand Controller OperationRate Button Direction ButtonsUse the Up and Down scroll keys to choose between Alignment ProcedureInitial Set-Up DefinitionSky Align Tips for Using Sky AlignOne-Star Align Auto Two-Star AlignTwo Star Alignment Selecting an Object Tips for Using Solar System AlignSolar System Align StarSeeker Re-AlignmentFinding Planets Tour ModeSet Up Procedures Slewing to an ObjectIdentify Utility Features Scope Setup FeaturesTelescope Basics Celestial Observing Telescope Maintenance Collimating the StarSeeker 130mm Collimating the StarSeeker 114mmAll SpecificationsStarSeeker StarSeeker Menu TreeGlossary of Terms Appendix aPage Appendix B RS-232 Connection Maps of Time Zones Appendix CPage Page Page Page Page Page Page Two-Year Limited Warranty

9536, 9535, 9533 specifications

Orion 9533, 9535, and 9536 are advanced devices that showcase a remarkable integration of innovative technologies and user-centric features, setting a new standard in their respective market segments. These models are designed to cater to various applications in both commercial and industrial settings, ensuring that users get the most out of their investment.

One of the main features of the Orion 9533, 9535, and 9536 is their robust design. Built to withstand challenging environments, these models feature durable housings that protect internal components from dust, moisture, and temperature fluctuations. This ruggedness makes them ideal for applications in manufacturing, logistics, and outdoor settings, where traditional devices might falter.

In terms of technology, the Orion series incorporates advanced connectivity options. They support multiple communication protocols including Wi-Fi, Bluetooth, and Ethernet, enabling seamless integration into existing networks. This connectivity allows for real-time data transmission and monitoring, facilitating efficient operations and timely decision-making. Additionally, these devices come equipped with cloud capabilities, enabling users to access data from anywhere, enhancing remote management and analysis.

The user interface of the Orion 9533, 9535, and 9536 is designed with simplicity and efficiency in mind. Featuring intuitive touchscreens and customizable dashboards, users can easily navigate through various functions and settings. The devices also support multiple languages, making them accessible to a global audience.

Performance-wise, these models are powered by high-efficiency processors that ensure swift data processing and responsive operation. This ensures that users do not experience lag during demanding tasks. The Orion series also boasts impressive battery life, combining energy-efficient technology with powerful performance, allowing for extended use without frequent recharging.

Another key characteristic of the Orion 9533, 9535, and 9536 is their versatility. They come equipped with a variety of sensors and ports, which enable compatibility with a wide range of peripherals and accessories. This makes them suitable for various applications, from data collection and analysis to real-time monitoring and control systems.

In summary, Orion 9533, 9535, and 9536 are a fusion of durability, cutting-edge technology, and user-focused design. Their advanced features and capabilities make them valuable tools for businesses looking to enhance productivity, ensure reliability, and streamline operations across various industries.