iOptron N114 instruction manual Mount/GPS Status

Target Name	Mount/GPS Status
Right Ascension	Declination
Altitude	Azimuth
Local Date and Time	Slew Speed

Figure 2. #8405 Hand Controller LCD Information Screen

1.Target Name: displays the name of the target that telescope is currently pointed to.

•Park Position: A default position when the mount is turned on, i.e., the telescope is pointed to zenith (altitude is 90º) and the mount is facing south (azimuth is 180º);

•An object name, such as “Mercury” or “Andromeda Galaxy”: Name of the Star or celestial object currently that is currently slewing, gotoing or tracking;

•LandMark #: The telescope is working in Land mode and is pointing to a land mark # (note: telescope does not track in land mode)

•User Position: The mount has been manually slewed to an object; or an R.A and DEC value of an object was manually entered; or a goto or tracking process has been interrupted.

2.Mount/GPS Status: display current status of the mount. If the mount equipped with a GPS (integrated GPS receiver or external GPS module), it also indicates GPS status, when the mount is turned on.

Stop (Mount Status): the telescope is in a standby position;

•Slew (Mount Status): the telescope is manually slewing to the target;

•Goto (Mount Status): the telescope is going to the target;

•Track (Mount Status): the telescope is tracking a target;

•Align (Mount Status): the telescope is in align mode;

•G-ON (GPS Status): GPS is on and trying to lock on to a satellite;

•G-OK (GPS Status): The connection between GPS receiver and satellites has been established (This status will be replaced by Mount Status after a few minutes).

3.R: Right Ascension of the telescope, or R.A.

4.D: Declination of the telescope, or DEC.

5.A: Altitude of the telescope (zenith is 90º).

6.Z: Azimuth of the telescope (north is 0º, east 90º, south 180º, and west 270º).

7.Local Date and Time: display local time in a format of YY-MM-DD HH:MM:SS.

8.Slew speed: There are 5 speeds: 2X, 8X, 64X, 256X (1º/sec), MAX(~4º/sec). Press the SPEED key to change the speed while slewing.

9