Input Configuration Daisy Chaining Speakers

Cerwin-Vega! TS-42 Folded Horn

4.INPUT CONFIGURATION: DAISY CHAINING SPEAKERS

Since all Cerwin-Vega! Folded Horns are equipped with a pair of Speakons connectors (that are parallel inputs); it is possible to daisy-chain speakers by connecting the output of the powered amplifier to one input, then daisy chaining to a second speaker.

Since each folded horn is an 8 ohm load, daisy chaining two folded horns would provide a 4 ohm load.

Caution If you daisy chain two folded horns make sure that you double your amplifier power and use an amplifier that will handle a 4 ohm load. Because of the current limitations of the Neutrik Speakon connectors it is not recommended to daisy chain more than two TS-42 folded horns.

5.SPECIFICATIONS

Cerwin-Vega! TS-42 Folded Horn

	(-3 dB) 35 Hz – 215 Hz
Frequency Response
	(-10 dB) 33 Hz – 230 Hz

Sensitivity @ 1w / 1 Meter	108 dB

Power Capacity	1000 w (RMS), 2000 w (Peak)

Recommend Amplifier Power	1500 w - 2000 w @ 8 ohms

Maximum SPL	144 dB

Input Connectors	(2) Neutrik Speakon

Voice Coil Diameter	4”

Nominal Impedance	8 ohms

	228.5 lbs
Weight
	103.6 kg

	42.5” x 24” x 45.3"
Dimensions (H x W x D)
	108 cm x 61.07 cm x 115 cm