Pentair Quasar owner manual Section III. Electrical Connections for Storable Pools

Page 5

16.Now, from inside the pool, push the bulb assembly and flow director with the red cap/plug in place into the fitting body until the bulb assembly/flow director are nearly flush against the inside pool wall.

17.Thread the bulb assembly nut until it just touches the fitting body, then finger tighten.

CAUTION

Do not over tighten as adjustability of the flow director may be impaired and/or damage to parts causing leakage may occur. If the flow director does not rotate by hand, the nut is too tight.

18.Take the red cap/plug off and gently bring the wire connectors through the back side of the bulb assembly. Save the red cap/plug for storage and winterizing.

CAUTION

This lighting fixture may be damaged if subjected to freezing weather. See winterizing instructions for details on how to store the bulb assembly.

SECTION III. ELECTRICAL CONNECTIONS FOR STORABLE POOLS

1.Connect the wire connectors from the bulb assembly to the wire connectors attached to the snap-on cord cap.

NOTE

There is no polarity (no positive or negative) to the wires, either connection will work.

2.Snap the cap onto the end of the body and turn so that the electrical cord is pointing down.

 

Liner

 

Pool Wall

Body

Wall

 

Flange

Clamp

Gaskets (2)

Figure 7. Hose

3.Mount the transformer on the vertical wall using the single screw provided.

4.Plug the power cord’s 3-prong plug into an appropriate 110V GFCI protected receptacle at least 10 feet from the pool.

5.If the light is not on, press the switch on the transformer case once.

WARNING

Risk of electric shock. Connect only to a grounding-type receptacle protected by a GFCI. Do not use extension cords for connection. Failure to do so can result in death or severe personal injury.

Key

Keyway

O-Ring—use silicone lubricant only. Do not use any petroleum products.

Figure 8.

REV. F 1-6-05

5

P/N 98748000

Image 5
Contents Table of Contents Section II. Lamp Housing Installation Section I. Important Safety InstructionsRetain the gaskets supplied and keep them accessible Do not over tighten the flange Section III. Electrical Connections for Storable Pools Section IV. Electrical Connections for Permanent Pools ¿¿¿WHAT is a GFCI???Rear view of transformer assy Screw Can result in death or severe personal injury Section Relamping InstructionsSection VI. Storage and Winterizing Instructions SECTION.VII. Technicaldata ReplacementpartsHawkins Ave., Sanford, NC 27330 919

Quasar specifications

Pentair Quasar is an innovative pool and spa filtration system designed to enhance water quality while providing exceptional energy efficiency and ease of use. Known for its advanced engineering and robust features, the Quasar series stands out in the competitive world of pool maintenance.

One of the key features of the Pentair Quasar is its advanced filtration technology, which integrates multi-layer filtration media to effectively capture both large debris and microscopic particles. This results in exceptionally clean water, ensuring that pool owners can enjoy crystal-clear swimming conditions. The multi-layer system minimizes the need for frequent filter changes, thus significantly reducing operational costs and environmental impact.

The Quasar utilizes cutting-edge pump technology, designed to operate efficiently at varying flow rates. This dynamic performance allows for optimal circulation without wasting energy, catering to different pool sizes and requirements. The variable-speed pumps are engineered to deliver silent operation while achieving significant energy savings compared to traditional single-speed pumps. This aligns well with the growing trend towards sustainability in pool management.

Another standout characteristic is its user-friendly control system, which features intuitive touchscreen interfaces that allow for easy adjustments to temperature, filtration schedules, and maintenance alerts. The user-centric design ensures that operators, regardless of experience level, can manage water quality effectively. Moreover, this system can seamlessly integrate with modern smart home technologies, allowing users to monitor and control their pool environment remotely via mobile applications.

The Pentair Quasar also emphasizes durability and reliability. Constructed from high-quality materials resistant to corrosion and UV damage, the system is built to withstand the rigors of outdoor environments. Maintenance is simplified further by design elements that facilitate easy access to internal components, making routine servicing more convenient.

In addition, the Quasar series features advanced water sanitization technologies, including options for salt chlorination systems which promote a more natural swimming experience, free from harsh chemicals. This enhances swimmer comfort while maintaining the highest water sanitation standards.

In summary, the Pentair Quasar represents a leap forward in pool filtration technology. With its multi-layer filtering capabilities, energy-efficient pumps, intuitive control systems, and enhanced durability, it offers an optimal solution for homeowners looking to maintain pristine pool conditions with minimal effort and environmental impact. The Quasar is a testament to Pentair's commitment to innovation in water technology, making it a preferred choice for discerning pool enthusiasts.