Pentair Quasar owner manual Rear view of transformer assy

Page 7
Strain
Relief

WARNING

Do not attach or hang anything but this cord from the cord cap through the hole in the body to the transformer housing. Attaching or hanging items from this location can result in failure to the body or the pool wall which can result in serious personalinjuryand/orpropertydamage.

5.Reinstall the snap-on cord cap to the stripped end of the cord leaving 1/4 inch black insulation protruding into the cap with the strain relief positioned as illustrated in Figure 13.

NOTE

Strain relief must be reinstalled at the end of the outer insulation jacket. This will leave the two insulated conductors extending from the inside of the snap end of the cord cap.

6.Strip the insulation back 1/4 inch on the two insulated conductors and install the two wire connectors provided into the end of each insulated conductor using a crimping pliers.

7.Connect the wire connectors from the bulb assembly to the wire connectors attached to the snap-on cord cap.

Press Together

Press Together

Figure 11.

Pool Wall

Run cord along wall.

Figure 12.

NOTE

There is no polarity (no positive or negative) to the wires, either connection will work.

8.Snap the cap onto the end of the body and turn so that the electrical cord is pointing down.

9.Cut off the cord with the 3-prong plug seven (7) in. from where it exits the transformer box; see Figure 9. Discard the remaining cord and plug.

10.Insert the cord from the plug through the smooth hole and then insert the cord through the

threaded hole. Slide the cord from the light assembly into the angled slot on the junction box bottom. Make sure the cord by the transformer box starts by the deep end of the angled slot; see Figure 14.

Snap-on Cord Cap

Figure 13.

Figure 14, Rear view of transformer assy.

REV. F 1-6-05

7

P/N 98748000

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Table of Contents Section II. Lamp Housing Installation Section I. Important Safety InstructionsRetain the gaskets supplied and keep them accessible Do not over tighten the flange Section III. Electrical Connections for Storable Pools Section IV. Electrical Connections for Permanent Pools ¿¿¿WHAT is a GFCI???Rear view of transformer assy Screw Can result in death or severe personal injury Section Relamping InstructionsSection VI. Storage and Winterizing Instructions SECTION.VII. Technicaldata ReplacementpartsHawkins Ave., Sanford, NC 27330 919

Quasar specifications

Pentair Quasar is an innovative pool and spa filtration system designed to enhance water quality while providing exceptional energy efficiency and ease of use. Known for its advanced engineering and robust features, the Quasar series stands out in the competitive world of pool maintenance.

One of the key features of the Pentair Quasar is its advanced filtration technology, which integrates multi-layer filtration media to effectively capture both large debris and microscopic particles. This results in exceptionally clean water, ensuring that pool owners can enjoy crystal-clear swimming conditions. The multi-layer system minimizes the need for frequent filter changes, thus significantly reducing operational costs and environmental impact.

The Quasar utilizes cutting-edge pump technology, designed to operate efficiently at varying flow rates. This dynamic performance allows for optimal circulation without wasting energy, catering to different pool sizes and requirements. The variable-speed pumps are engineered to deliver silent operation while achieving significant energy savings compared to traditional single-speed pumps. This aligns well with the growing trend towards sustainability in pool management.

Another standout characteristic is its user-friendly control system, which features intuitive touchscreen interfaces that allow for easy adjustments to temperature, filtration schedules, and maintenance alerts. The user-centric design ensures that operators, regardless of experience level, can manage water quality effectively. Moreover, this system can seamlessly integrate with modern smart home technologies, allowing users to monitor and control their pool environment remotely via mobile applications.

The Pentair Quasar also emphasizes durability and reliability. Constructed from high-quality materials resistant to corrosion and UV damage, the system is built to withstand the rigors of outdoor environments. Maintenance is simplified further by design elements that facilitate easy access to internal components, making routine servicing more convenient.

In addition, the Quasar series features advanced water sanitization technologies, including options for salt chlorination systems which promote a more natural swimming experience, free from harsh chemicals. This enhances swimmer comfort while maintaining the highest water sanitation standards.

In summary, the Pentair Quasar represents a leap forward in pool filtration technology. With its multi-layer filtering capabilities, energy-efficient pumps, intuitive control systems, and enhanced durability, it offers an optimal solution for homeowners looking to maintain pristine pool conditions with minimal effort and environmental impact. The Quasar is a testament to Pentair's commitment to innovation in water technology, making it a preferred choice for discerning pool enthusiasts.
Top Page Image Contents