Swim'n Play oval 4ft pool warranty Contract Installations

Page 2

CONTRACT INSTALLATIONS

The manufacturer is in no way affiliated with any professional pool installer. Therefore the manufacturer can assume no responsibility for errors in installation by the home owner or said professional installer. If you have your POOL installed by others, please supervise them to be sure they comply with the proper installation techniques shown. Their past expe- rience or short cuts may not cover the latest improvements in our POOLS. Do not allow any short cuts of any nature.

LOCAL CODES

•Local building code may require obtaining a building permit and or an electrical permit. The installer shall follow the regulations on set backs, barriers, devices and other conditions.

•Any after market or home built deck should be built to the local building code requirements, including load capacity and fencing requirements.

•All electrical outlet connections should be a minimum of 5 feet from the outside perimeter of the wall of the pool. From 5-10 feet there should be either a fixed connection (outlet box) or twist lock connection with a GFCI. Connect power cords to a 3-wire grounding-type outlet only.

•Severe electrical shock could result if you install your pump or filter on a deck. They could fall into the water, causing severe shock or electrocution. Do not install on a deck or other surface at, above or slightly below the top ledge of the pool.

BARRIER REQUIREMENTS

•If the distance from the top of the assembled pool is less than 48" vertically from the surrounding grade, a fence or barrier is needed to surround the pool with a minimum height of 48".

•A barrier is necessary to provide protection against potential drowning and near drowning and is not a substitute for constant supervision of children. A barrier is a fence, wall, or a combination thereof which completely surrounds the swimming pool and obstructs access to the swimming pool. Barriers must comply with local and national building codes and the US Consumer Product Safety Commission.

•These are minimum fencing and barrier requirements. Check your local building codes for other requirements they may request. Optional fencing kits are available, Please contact your local dealer.

•If pool covers are used for safety barriers they should comply with ASTM F 1346 "Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs."

SPECIAL CARE

Even though this manufacturer's pools are designed to meet or exceed industry recommended safety factors, special attention must be paid to some installation procedures that the installer performs and controls.

•Levelness Spend the time to assure that the entire pool framework is level within 1". Unlevel pools place extreme pressures on the pool walls.

•Wall seam This area is where the wall joins together. Damage to any part of this area reduces the safety factors and can result in a weak pool. Use extreme care following instructions.

•Earth mound This keeps the liner from creeping out from under the pool wall. Follow instructions to the letter

–don't short-cut or substitute materials. Improperly installed pools can rupture, allowing thousands of gallons of water to rush out causing extensive property damage and injury to anyone in its path.

•This manufacturers pools are not designed to be buried. Outside ground forces can collapse pool wall. Certain conditions may exist, like the levelness of the pool area that require the pool to be recessed. You must maintain a finished pool height of 36” above ground level. If your pool is 48” deep, you may recess the pool by 12” (48”-36”=12”). Consult your local pool professional and building codes as to the use of earth retaining walls to recess your pool deeper than this recommended amount. Make sure that the pool remains full of water for at least 7 days before backfilling the pool recess. Place a layer of plastic film against the pool before backfilling to protect the pool from corrosion agents that may be found in the backfill materials.

•The pool owner has the sole responsibility for providing adequate lighting for the pool area.

•All users must be able to see the shallow depth of the pool, and safety signs at all times.

•You must install a pool ladder(s) and/or steps for entry and exit from the pool.

•The use of artificial pool lighting is at the discretion of the pool owner.

•All electrical components shall be installed in accordance with Article 680 of the National Electrical code 1999 (NEC®) “Swimming Pools, Fountains and Similar Installations” or its latest approved edition.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Oval Pool Contract Installations Introduction Some Friends To Help OUTInstallation Assembly Steps XL Pools Deluxe Pools Supreme Pools Fig. GPreparing the Ground Clearance SizeLeveling the Ground Nail Center Stake Clearance RadiusAssembling the Bottom Straps SizesBottom Plate Bottom Rail and Strap LayoutInsert Wall Into Bottom Rails Bottom RailClosing the Wall Serrated Flange NUTAssemble Buttress Brace FigHold Down Sheet Protect Your LinerRechecking Your Work Tapecloth TapeOnly THRU-THE-WALL SkimmerEarth Mound Earth MoundCorrect Liner InstallationLiner IncorrectEZ Hook Liner Installation CoveVertical Buttress PRE-ASSEMBLY of TOP PlatesVERTICALS, TOP Plates and Rails Plastic Installing Ledges Placement of Warning LabelsInstalling TOP Covers 7 Deluxe TOP CoversTOP Cover Ledge 9 TWO-PIECE Wrap around Cover Pedestal Inside CoverXL Wrap Around Cover Outside Cover LogoSafety Brochures and Education Programs Pool User Warning LabelsSafety Tips Rules and Regulations Winter Care Preventative Maintenance TipsLife Saving Equipment Care of Pool WaterANY Objects That MAY Provide Access to the Pool

oval 4ft pool specifications

The Swim'n Play Oval 4ft Pool is an excellent addition to any backyard, designed to accommodate families and friends looking for a refreshing way to enjoy summer. This pool combines high-quality materials, user-friendly features, and efficient technology, making it a preferred choice for both seasoned pool owners and first-timers.

One of the standout characteristics of the Swim'n Play Oval Pool is its size. With a depth of 4 feet, it is ideal for both adults and children, providing ample space for fun and relaxation without the need for extensive yard space. The oval shape enhances the pool's aesthetics, making it a visually appealing feature of any outdoor setting.

Built with sturdy materials, the pool features a high-quality resin frame that ensures durability and resistance against wear and tear from the elements. Its robust construction ensures stability, allowing the pool to withstand various weather conditions, whether it be scorching sun or occasional rain.

In terms of technology, the Swim'n Play Oval Pool is designed for easy assembly and disassembly, making it convenient for seasonal use. The pool kit typically includes a straightforward manual with step-by-step instructions, which can significantly reduce setup time. Moreover, the pool comes with an integrated filtration system, ensuring the water remains clean and clear with minimum effort.

Safety is a primary concern for any pool owner, and the Swim'n Play Oval Pool boasts features that prioritize user safety. The edges are designed to be smooth, minimizing the risk of cuts or scrapes, while also allowing for easy entry and exit.

The pool's walls are made from puncture-resistant materials, enhancing its resilience against potential damage. Additionally, its compact shape means that it uses less water compared to larger models, making it an environmentally friendly option.

With a variety of accessories available, such as pool covers and maintenance kits, the Swim'n Play Oval Pool can easily be customized to enhance your swimming experience. Its appealing design, coupled with its practical features, makes the Swim'n Play Oval 4ft Pool a smart and enjoyable investment for anyone looking to make a splash in their backyard.
Top Page Image Contents