Swim'n Play oval 4ft pool warranty Installing TOP Covers, Deluxe TOP Covers

Page 21

INSTALLING TOP COVERS

FOLLOW THE INSTRUCTIONS BELOW

FOR THE COVERS FOR YOUR PARTICULAR POOL

4", 6" & 7" DELUXE TOP COVERS

These covers don’t require cage nuts or top cover screws.

For pools with the new 1-piece deluxe top covers, simply snap the cover into place, aligning the tab on the bottom of the cover with the slot in the top plate of pool (fig.A only.)

For 2-piece covers, insert bottom section into top (fig. 1) so that it becomes one unit (fig. 2). Then snap cover into place aligning tab on bottom of cover with slot in the top plate of pool (fig. 3) and secure with a #10 x 1" screw (fig. 4).

1

2

3

17

A

4

#10X1” SELF

TAPPING SCREW

IMPORTANT: Make sure that the inside edge of the top cover is securely positioned over the edge of the ledges

21

Image 21

Contents Oval Pool Contract Installations Some Friends To Help OUT IntroductionInstallation Assembly Steps XL Pools Fig. G Deluxe Pools Supreme PoolsClearance Size Preparing the GroundNail Center Stake Clearance Radius Leveling the GroundSizes Assembling the Bottom StrapsInsert Wall Into Bottom Rails Bottom Rail and Strap LayoutBottom Plate Bottom RailSerrated Flange NUT Closing the WallBrace Fig Assemble ButtressRechecking Your Work Protect Your LinerHold Down Sheet Tapecloth TapeTHRU-THE-WALL Skimmer OnlyEarth Mound Earth MoundLiner Liner InstallationCorrect IncorrectCove EZ Hook Liner Installation PRE-ASSEMBLY of TOP Plates VERTICALS, TOP Plates and Rails Vertical Buttress Plastic Placement of Warning Labels Installing Ledges7 Deluxe TOP Covers Installing TOP CoversTOP Cover Ledge Inside Cover 9 TWO-PIECE Wrap around Cover PedestalOutside Cover Logo XL Wrap Around CoverPool User Warning Labels Safety Brochures and Education ProgramsSafety Tips Rules and Regulations Life Saving Equipment Preventative Maintenance TipsWinter Care Care of Pool WaterANY Objects That MAY Provide Access to the Pool