Premium Home Creations K-2369 manual Complete the Installation, Silicone sealant

Page 5

9Align the basin and drain body assembly with the drain hole in the countertop. Lower the drain body through the countertop drain hole until the basin rests on the countertop.

10.Slide the washer onto the drain body.

11.Thread the nut onto the drain body.

12.Tighten the nut until secure, making sure the drain is properly centered in the basin. Do not overtighten.

Complete the Installation

Optimal/Recommended

Water Delivery Location

Countertop

Apply continuous bead

 

of silicone sealant.

Important! When installing the tap, the water should contact the basin in the area shown in the diagram for best performance.

1.Apply a thin bead of clear silicone sealant where the basin meets the countertop.

2.Install the tap in accordance with the tap manufacturer’s instructions.

1113919-W2-A

5

Image 5
Contents Model Numbers 1113919-W2-A General DimensionsInstallation 41 mm Install the BasinSilicone sealant Complete the InstallationCleaning User Maintenance1113919-W2-A Customer Care Guarantee of Quality