Fisher-Price B1637 manual Frame Hub Push Button Swing Tube Front Seat Curved Base

Page 9

Seat Bottom

Assembly

Frame Hub

Push

Button

Swing

Tube

Front

of Seat

Curved

21 Front

Base

•Position the seat assembly so that the front of the seat is toward the curved front base.

•While pressing the buttons on the swing tubes, insert them into the frame hubs. Push the swing tubes up until the buttons “snap” into the hole in the frame hubs.

•Push down on the seat to be sure the seat is secured in both frame hubs.

Slot

Pad

Slot

Waist Belts

23

•Fit the pocket on the back of the pad onto the seat back.

•Fit the waist belts through the smaller slots in the pad.

Pad

Elastic

Loops

Frame

Hubs

22

#8 x 13/8” Screw - 2

Shown Actual Size

•Insert a #8 x 13/8" screw into each frame hub and tighten.

•Again, push down on the seat to be sure the seat is secured to both frame hubs.

Crotch

Belt

Holes

24

• Lift the bottom of the pad.

•Insert the pad elastic loops through the holes in the seat bottom.

•Insert the crotch belt through the slot in the pad.

•From under the seat, fit the elastic loops onto the tabs on the seat bottom.

9

Image 9

Contents Model Number B1637 Deluxe Quick Response SwingConsumer Information Parts Assembly Them correctly. Please re-read and repeat this assembly step Set the frame assembly aside for Assembly step Fit the grooves on the bracket to the seat tubes, as shown Insert two #6 x 5 / 8 screws Press the seat wire caps Into placeFrame Hub Push Button Swing Tube Front Seat Curved Base Assembly Assembly Battery InstallationAssembly is now complete Ttery Ion TteryInf Ormation Securing Your Child To tighten the restraintTo loosen the restraint Ttac Using the TraySwinging Storage Care To remove the padTo replace the pad One 1 Year Limited Warranty ForTate