ENGLISH (Original instructions)
SPECIFICATIONS
Model | UH4570 | UH5570 | UH6570 |
Blade length | 450 mm | 550 mm | 650 mm |
Strokes per minute | 1,600 | 1,600 | 1,600 |
Overall length | 862 mm | 970 mm | 1,042 mm |
Net weight | 3.6 kg | 3.7 kg | 3.8 kg |
Safety class |
| /II |
|
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications may differ from country to country.
•Weight according to
Symbol
The following show the symbols used for the equipment. Be sure that you understand their meaning before use. 
･ Read instruction manual.
･ DOUBLE INSULATION
･ Do not expose to rain.
･ Remove plug from the mains immediately if the cable is damaged or cut.
･ Only for EU countries
Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and
electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to
an environmentally compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on
Noise
The typical
Sound pressure level (LpA) : 89.9 dB(A)
Sound power level (LWA) : 97.9 dB(A)
Uncertainty (K) : 1.5 dB(A)
Wear ear protection
Vibration
The vibration total value
Work mode : hedge trimming
Vibration emission (ah) : 6.7 m/s2
Uncertainty (K) : 1.5 m/s2
•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.
•The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):
2