Makita UH5570, UH6570, UH4570 instruction manual Operation, Arm cord hook Accessory

Page 7

Arm cord hook (Accessory)

CAUTION:

Do not attach the holder of arm cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete hooks. Failure to do so may cause an accident or personal injury.

Attach firmly one hook of the hook complete to the tool's cord and the other hook of hook complete to the extension cord. Working with the tool with a sole hook only attached may cause an accident

and injury.

Using the arm cord hook helps to minimize a risk of cutting off the extension cord unexpectedly caused by the loose extension cord.

2

1. Holder

2. Arm cord hook

 

1

 

009294

 

Attach firmly the arm cord hook placing around your arm and pass the extension cord through the holder. The length of the arm cord hook band is adjustable.

NOTE:

Do not pass the extension cord through the band.

Do not force the opening of the holder. Failure to do so may cause deflection and damage to it.

Using the arm cord hook together with the waist cord hook is more helpful.

007559

CAUTION:

Do not cut off dead trees or similar hard objects. Failure to do so may damage the tool.

Hold the trimmer with both hands pull the switch trigger A or B and move it in front of your body.

009283

As a basic operation, tilt the blades towards the trimming direction and move it calmly and slowly at the speed rate of 3 - 4 seconds per meter.

OPERATION

CAUTION:

Be careful not to accidentally contact a metal fence or other hard objects while trimming. The blade will break and may cause serious injury.

Overreaching with a hedge trimmer, particularly from a ladder, is extremely dangerous. Do not work from anything wobbly or infirm.

Do not attempt to cut branches thicker than 10 mm diameter with this trimmer. These should first be cut with

009284

1

2

3

009285

1.Trimming direction

2.Tilt the blades

3.Hedge surface to be trimmed

shears down to the hedge trimming level.

To cut a hedge top evenly, it helps to tie a string at the desired hedge height and to trim along it, using it as a reference line.

7

Image 7
Contents Hedge Trimmer Symbol SpecificationsEC Declaration of Conformity General Power Tool Safety Warnings Hedge Trimmer Safety Warnings Vertical cut Switch actionFunctional Description Straight cutFar area cut AssemblyEngage the extension cord Waist cord hookOperation Arm cord hook AccessoryInstalling or removing chip receiver accessory Blade maintenance MaintenanceRemoving or installing shear blade Cleaning the toolInstalling the shear blade Storage AccessoriesMakita Corporation Anjo, Aichi, Japan