Motorola WR850G manual LED Description, Led, Condition Color Status, Off, None

SECTION 1 OVERVIEW

LED Description

The underlined items represent network activity.

LED	Condition	Color	Status
1 Power	ON	Green	The device is powered on and operating normally.
	Blinking	Green	Firmware update is in progress.
	Blinking/OFF	Red	The power LED turns RED as soon as the reset
			button is depressed. If the reset button is held down
			for more than 5 seconds, the LED starts to blink
			and the router’s default user name, password,
			private LAN IP address, and private subnet mask
			address will be restored. The LED then turns off
			until the reset button is released. The power LED
			keeps blinking RED if the firmware is corrupted,
			indicating the firmware needs to be restored.
2 Modem	OFF	None	No external Ethernet device has been attached and
			detected. The Ethernet link is down.
	ON	Red	The WAN interface has been disabled by the
			firmware.
	Blinking	Red	The WAN connection has lost IP connectivity with
			its default gateway even though the Ethernet link is
			still up. Or the WAN connection repair procedure is
			still in progress.
	ON/Blinking	Amber	10BaseT link detected/active traffic present.
	ON/Blinking	Green	100BaseT link detected/active traffic present.
3 Wireless	OFF	None	No mobile station or Access Point has associated
			with this device.
	ON	Red	The wireless interface has been disabled by the
			firmware.
	ON/Blinking	Amber	802.11b connection exists in this wireless
			domain/active traffic present.
	ON/Blinking	Green	802.11g connection exists in this wireless
			domain/active traffic present.
4 LAN (x4)	OFF	None	No external Ethernet device has been attached and
			detected. The Ethernet link is down.
	ON/Blinking	Amber	10BaseT link detected/active traffic present.
	ON/Blinking	Green	100BaseT link detected/active traffic present.

1-10 SECTION 1, OVERVIEW