ViewSonic WPG-360 manual Windows Vista / 7 IP address setup

2-3-2 Windows Vista / 7 IP address setup:

Click ‘Start’ from windows toolbar locate at bottom to select control panel. Click View Network Status and Tasks, then click Manage Network Connections. Right-click Local Area Netwrok, then select ‘Properties’. Local Area Connection Properties window will appear, select ‘Internet Protocol Version 4 (TCP / Ipv4), and then click ‘Properties’

Select ‘Use the following IP address’, then input the following settings in respective field:

IP address: 192.168.0.x (where x is an integer greater or less than 200, if there’s more than one computer need to use this WPG on the same network, every computer should use an unique number)

Subnet Mask: 255.255.255.0 Click ‘OK’ when finish.

ViewSonic WPG-360 13