4-5-2 ‘Advanced’ Settings
Display and configures the advanced settings.
Item | Description |
Fragment | Set the Fragment threshold of wireless radio. |
Threshold | Default value is 2346. |
RTS Threshold | Set the RTS threshold of wireless radio. Default value is 2347. |
Beacon Interval | Set the beacon interval of wireless radio. Default value is 100. |
DTIM Period | Set the DTIM period of wireless radio. Default value is 3. |
Data Rate | Change data transfer rate. Default value is ‘Auto’ and it’s |
| recommended to use default setting. |
N Data Rate | Same as above, but only for 802.11n clients. |
Channel Width | Set channel width of wireless radio. Default setting is ‘Auto 20/40 |
| MHz’. |
Preamble Type | Set the type of preamble of wireless radio, Default setting is ‘Short |
| Preamble’. |
Broadcast Device | Decide if the product will broadcast its own device name or not. You |
Name (SSID) | can hide the device name of this product (set the option to ‘Disable’) |
CTS Protect | Enable to reduce the chance of radio signal collisions between |
| 802.11b and 802.11g wireless access points. It’s recommended to |
ViewSonic | 30 |