ViewSonic WPG-360 manual Windows XP IP address setup

2-3-1 Windows XP IP address setup:

Click ‘Start’ from windows toolbar locate at bottom, open control panel, then select Network and Internet Connections, click Network Connections, and then double-click Local Area Connection, Local Area Connection Status window will appear, and then click ‘Properties’

Select ‘Use the following IP address’, then input the following settings in respective field:

IP address: 192.168.0.x (where x is an integer greater or less than 200, if there’s more than one computer need to use this WPG on the same network, each computer should use an unique number)

Subnet Mask: 255.255.255.0 Click ‘OK’ when finish.

ViewSonic WPG-360 12