User Guide XB1 COM Express Module
Removing the Board
Warning
This procedure should be done only by qualified technical personnel. Disconnect the system from its power source before doing the procedures described here. Failure to disconnect power, or telecommunication links before you open the system or perform any procedures can result in personal injury or equipment damage.
Typically you will perform the following steps:
CSwitch off the system, remove the AC power cord
C Attach your antistatic wrist strap to a metallic part of the system
CIdentify the board, be sure to touch the board only at the front panel
CUnfasten screws
CRemove the module carefully
CStore board in the original packaging, do not touch any components, hold the board at the heat spreader only
Warning
Do not expose the card to fire. Battery cells and other components could explode and cause personal injury.
©EKF | ekf.com |