ViewSonic PRO9000 warranty Troubleshooting, Image Problems

Page 40

Appendices

Troubleshooting

If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center.

Image Problems

No image appears on-screen

`` Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.

`` Ensure the pins of connectors are not crooked or broken. `` Check if the projection lamp has been securely installed.

`` Make sure you have removed the lens cap and the projector is switched on.

Partial, scrolling or incorrectly displayed image

`` Press the “◄” (left direction) button on the control panel, or the “Auto Sync” button on the remote control to auto synchronizing for the analog PC signal.

yy If you are using a PC:

-- For Windows 95, 98, 2000, XP, Windows 7:

1.Open the “My Computer” icon, the “Control Panel” folder, and then double click on the “Display” icon.

2.Select the “Settings” tab.

3.Verify that your display resolution setting is lower than or equal to 1080p.

4.Click on the “Advanced Properties”.

-- For Windows Vista:

1.From the “My Computer” icon, open the “Control Panel” folder, and double click the “Appearance and Personalization”

2.Select “Personalization”.

3.Click “Adjust screen resolution” to display “Display Settings”. Click on the “Advanced Settings”.

39

Image 40

Contents Pro9000 1080p Laser Hybrid LED Home Theatre DLP Projector FCC Statement For CanadaCE Conformity for European Countries Following information is only for EU-member statesImportant Safety Instructions Declaration of RoHS Compliance Copyright Information For Your RecordsGround Table of Contents Introduction Package OverviewProduct Overview Main UnitControl Panel Connection Ports Remote Control Power OFFRgbcmy Installation Connecting to Computer/NotebookConnecting to Video Sources Powering On/Off the Projector Powering On the ProjectorPowering off the projector LED Indicator MessagesAdjusting the Projected Image Adjusting the Projector’s HeightAdjusting the Projector’s Focus Adjusting Projection Image SizeDistance v.s Screen size table Screen size v.s. Distance table Using the Control Panel User ControlsHow to operate On-screen Display MenusMain Menu Sub Menu Settings StructureOSD Brightness Color ModeContrast Color Management Color TempGamma Picture Color Temp Red GainGreen Gain Blue GainPicture Color Management ColorHue SaturationVIDEO/AUDIO Video Mode VIDEO/AUDIO Computer Mode PhaseFrequency PositionAspect Ratio KeystoneProjection Sleep Timer Power SavingSignal Type ECO ModePassword OSD SettingsPIP Setting InformationEquivalent Laser Hours Reset Factory DefaultOthers Equivalent Laser HoursChange Password Options PasswordSecurity Options OSD Settings OSD TimeoutMenu Location OSD TransparencyOptions PIP Setting PIP SourcePIP Location PIP SizeOptions Others Status MessageDigital Zoom PatternTroubleshooting Image ProblemsImage is unstable or flickering Image is reversed Projector Problems Projector stops responding to all controlsOn Screen Messages Compatibility Modes Yy ComputerYy Video Command Table Function DescriptionHDMI1 Ceiling Mount Installation Yy Screw type M3 Yy Diameter 3 mmSpecifications DLPConnectors Customer Support Limited Warranty Viewsonic ProjectorHow to get service Mexico Limited Warranty Viewsonic ProjectorViewSonic Mexico Limited Warranty