ViewSonic PRO9000 warranty Image is reversed

Image has vertical flickering bar

`` Use “Frequency” to make an adjustment. Refer to the “VIDEO/AUDIO Computer Mode” section for more information.

`` Check and reconfigure the display mode of your graphic card to make it compatible with the product.

Image is out of focus

`` Make sure the lens cap is removed.

`` Adjust the “Focus Ring” on the projector lens.

`` Make sure the projection screen is within the required distance of 4.1-16.4 feet (1.3-5.0 meters) from the projector.

The image is stretched when displaying 16:9 DVD title

When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side.

`` If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD.

`` If the image is still stretched, you will also need to setup the display format as 16:9 (wide) aspect ratio type on your DVD player.

Image is too small or too large

`` Move the projector closer to or further from the screen.

`` Press “Menu” on the control panel. Go to “SETTING” --> “Aspect Ratio”and try the different settings.

Image has slanted sides:

`` If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen.

`` Use “SETTING” --> “V Keystone” from the OSD to make an adjustment.

Image is reversed

`` Adjust the “Projection” to correct it. Refer to the “SETTING” section for more information.

41