Powering off the projector
1.Press the “ ” button on the control panel to turn off the projector. The following message will be displayed on the screen.
Press the “ ” button again to confirm.
You can also turn off the projector by pressing the Power OFF button on the remote control.
2.It is now safe to unplug the power cord.
LED Indicator Messages
Message | Lamp LED (Red) | Temp LED (Red) | Power LED (Blue) | |
|
|
|
| |
Power Plug | Flash On/Off 100ms | Flash On/Off 100ms | Flash On/Off 100ms | |
one time | one time | one time | ||
| ||||
Standby | - | - | Flash On 1sec/ | |
Off 6sec | ||||
|
|
| ||
Power Button On | - | - | Always On | |
|
|
|
| |
"Power Button Off: | - | - | off | |
Cooling completed: Standby Mode" | ||||
|
|
| ||
|
|
|
| |
Fimware download | Always On | off | Always On | |
|
|
|
| |
Thernal Sensor error: | - | Always On | Always On | |
|
|
|
| |
Fan Lock error | - | Flash On 0.5sec/ | Always On | |
Off 0.5sec | ||||
|
|
| ||
Lamp error | Flash On 0.5sec/ | - | Always On | |
Off 0.5sec | ||||
|
|
|
16