Bel Canto Design PHONO 1 manual Specifications

Page 8

Specifications

RIAA accuracy Into >20K Ohms • 20 Hz-20 kHz +/- 0.25 dB Signal to Noise Ratio • > 75 dB A weighted MM/MC Distortion at 3 Volts RMS out • <0.01%

Input configuration and impedance • Adjustable /MC, 47 Kohms/MM

Output Options • 1 Pair RCA Output Impedance • 50 ohms Maximum Output Level • 9Vrms 1 kHz Gain • 40, 54 or 60 dB

Power Requirements • 115/230 VAC; 50-60 Hz 10 watts

Size • 3.6 x3.6 x 9 inches

Weight • 3.5 lbs

Page 8

PHONO Owner's Manual

Image 8

Contents Bel Canto Design Low Noise Solid State Phono1 Preamplifier Page Design Features Warm Up Unpacking Do not connect power to this preamplifier yet Unpacking Cartridge Loading Gain Settings, Initial Setup, and PlacementGain Settings Phono1 Placement DIP switch settingInput Panel Connections RCA Main Output Jacks for Left and Right ChannelsSpecifications