Unpacking

The box containing your Phono1 contains the following parts:

1 - Phono1 User's Guide

1 - Power Cable for connection to utility power [1.85m, 6' long] (External Box

Version Only)

1 – Phono1 preamplifier

1 - Owner's Warranty / Registration Sheet

Carefully your new unit and check for shipping damage. If there is any damage, or if any piece is missing, please contact your

dealer or Bel Canto Design.

Save all packing materials as the packing is

specially designed to protect the preamplifier for shipping or transporting it. If you lose or damage the packing materials or carton, please contact your dealer or distributor before attempting to transport the preamplifier.

The Phono1's power supply is preset for the proper national voltages before you r eceive it. The power cable (External Unit Only) will have the proper plug for your local power system. If you believe this is not true, please contact your dealer immediately. Do not attempt to alter or

change power settings yourself!

Warning

Do not connect power to this preamplifier yet!

This preamplifier, like any electrical component, can be dangerous and cause injury unless cor rect handling procedures are observed and used. Before powering this preamplifier it is

necessary to read and follow proper procedures concerning its setup and use.

Any tampering of internal parts, other than for Moving Coil / Moving Magnet (MM/MC) setup, will immediately void your warranty.

For Warranty Coverage complete and mail the Owner's Registration Papers immediately.

PHONO Owner's Manual

Page 5