PRe6 Setup and Options, Factory Configuration

PRe6 Setup and Options

Factory Configuration:

The PRe6 has the following factory input settings:

Input 1: 5.1 Surround

Input 4, 5 and 6: Stereo

Input 7: 5.1 Surround

Input 10: Stereo

Input 11: Stereo

TAPE: Stereo

Modifying Factory Configuration:

Press the ENTER button on the remote eight times or press and hold the ENTER button on the front panel for two seconds to engage Configuration Mode.

Configuration Mode allows you to customize individual inputs/channels. Navigation is accomplished with the UP and DOWN and down arrow but- ton to select menu options, and the RIGHT and LEFT arrow buttons to select the input you wish to change (See pages 10-14). If you are called away for more than 30 seconds while in Input Configuration mode, the unit will exit Input Configuration mode. Your changes will remain in memory (but won’t take affect) until either the unit is shut off (deleting the changes) or you reenter Input Configuration mode and finish your adjustments, then SAVE (see below).

Top Level Menu

The Top Level menu screen has four options selectable using the right/left

arrow buttons: CONFIGURATION (of) INPUTS, CONFIGURATION (of) OFF- SETS, SAVE CONFIG? and ERASE CONFIG?.

CONFIGURATION (of) INPUTS:

Using the down arrow button, CON- FIGURATION (of) INPUTS menu allows you to customize your PRe6 in the following ways: Define Input (5.1, 7.1, Stereo, Disable), Name Input, Set MAIN Volume, Set SoftMute Vol(ume), Set Zone2 Volume. Press ENTER to edit a given setting, adjust setting using the UP and DOWN arrow buttons and press ENTER again to exit edit mode.

CONFIGURATION (of) OFFSETS:

The CONFIGURATION OFFSETS menu allows for adjustment of the Surround Sound speaker levels. The RIGHT and LEFT arrow buttons allow you to select either Surround Input. As you press the down arrow button, selection options are: Center, LFE- Sub, Left Surround, Right Surround. If 7.1 Surround is enabled, Sur Left Back and Sur Right Back will also be available. Surround levels can be adjusted +10 to –20 dB in relation to the front main speakers. Press ENTER to edit a given setting, adjust setting using the UP and DOWN arrow buttons and press ENTER again to exit edit mode.

page 8

PRe6 User’s Guide rev082102

PRe6 specifications

Bel Canto Design is renowned for its commitment to high-fidelity audio, and the PRe6 is a testament to this tradition of excellence. As a high-performance preamplifier, the PRe6 seamlessly combines sophisticated technology with elegant design, providing audiophiles with an unparalleled listening experience.

One of the standout features of the PRe6 is its fully balanced architecture, which plays a crucial role in minimizing noise and distortion. This design choice allows the preamplifier to deliver a clean, dynamic sound, ensuring that the fine details of music are presented with clarity and precision. The use of high-quality components, including custom capacitors and discrete resistors, contributes to the overall performance, enhancing both the sonic quality and durability of the unit.

At the heart of the PRe6 lies a versatile digital processing section that is compatible with high-resolution audio formats. This allows users to connect various digital sources, including computers, CD players, and streaming devices, making it an ideal centerpiece for modern audio setups. The PRe6 supports a wide range of digital inputs, including USB, optical, coaxial, and AES/EBU, providing flexibility in connectivity. It can handle PCM resolutions up to 384 kHz and DSD up to 256, ensuring that even the most demanding audiophile will find it meets their needs.

Another notable characteristic of the PRe6 is its intuitive user interface. The elegant front panel features a large display that provides clear feedback on input selection and volume levels. The remote control further enhances usability, giving listeners the ability to adjust settings from across the room.

Additionally, the PRe6 is equipped with advanced features like a programmable volume control, which allows precise adjustments and integration into home automation systems. Its modular design enables easy upgrades, ensuring that the preamplifier can adapt to future advancements in audio technology.

In summary, the Bel Canto Design PRe6 is a high-performing preamplifier that embodies cutting-edge technology and superb craftsmanship. With its balanced architecture, extensive digital connectivity, and user-friendly interface, the PRe6 is poised to satisfy even the most discerning audio enthusiasts. Whether used in a dedicated listening room or a sophisticated home theater setup, the PRe6 delivers exceptional sound quality, ensuring a captivating musical experience.