Define Inputs, Disable, Edit Input Name

SAVE CONFIG ?

After you have edited your settings, you must SAVE your settings by using the UP or DOWN arrow keys in the SAVE CONFIG? screen. Or you can press ENTER at the Configuration Input screen, which will bring you to the SAVE CONFIG? screen, then use the UP/DOWN arrow buttons to select SAVE YES/NO and then press ENTER.

ERASE CONFIG ?

This will reset your PRe6 to the facto- ry settings, use the UP/DOWN arrow buttons to select ERASE YES/NO and then press ENTER.

CONFIGURATION (of) INPUTS

Define Inputs:

The input definition screen allows you to set up and assign all available inputs. Using the RIGHT and LEFT arrow keys allows you to cycle through all available inputs.

Available inputs will depend on Surround Sound modes chosen. Inputs 1 and 7 can be configured for multi-channel use, either 5.1 or 7.1, in addition to Stereo or Disabled. Surround Sound modes make use of adjacent inputs on the back panel as necessary.

For instance: If you set Input 1 to 7.1 Surround, Input 1 now controls Inputs 1, 2, 3 and 4. When you define Input as a Surround format, inputs 2, 3 (and 4 if you chose 7.1 surround) will no longer be available separately

and will be skipped when cycling through inputs, as they now are defined as being part of Input 1. On the back panel of the unit, these numbered inputs are also labeled according to their Surround Speaker: Input 1 - F for Front left and right. Input 2 - C for center and LFE for sub- woofer. Input 3 - S for surrounds and Input 4 - SB for Surround Back. You will notice that inputs 6-9 follow a similar format. Green LEDs on the back panel show which inputs are selected to aid in cable connection.

Disable:

When cycling through inputs from both the front panel and remote, selecting DISABLE deactivates an input and removes it from the menu.

Edit Input Name:

Input selections can be labeled with up to 8 characters consisting of upper and lower case letters, a space and numbers 0-9. Press ENTER to edit Input Name. A cursor will appear. Use the RIGHT and LEFT arrow buttons to move cursor. Use the UP and DOWN arrow buttons to select the letters and numbers of your choice. Press ENTER again to exit Edit mode.

Set MAIN Volume:

Each individual input can be adjusted in .5 dB steps to match levels from various source components when selected (factory default is 65). Use

page 9

PRe6 User’s Guide rev082102

PRe6 specifications

Bel Canto Design is renowned for its commitment to high-fidelity audio, and the PRe6 is a testament to this tradition of excellence. As a high-performance preamplifier, the PRe6 seamlessly combines sophisticated technology with elegant design, providing audiophiles with an unparalleled listening experience.

One of the standout features of the PRe6 is its fully balanced architecture, which plays a crucial role in minimizing noise and distortion. This design choice allows the preamplifier to deliver a clean, dynamic sound, ensuring that the fine details of music are presented with clarity and precision. The use of high-quality components, including custom capacitors and discrete resistors, contributes to the overall performance, enhancing both the sonic quality and durability of the unit.

At the heart of the PRe6 lies a versatile digital processing section that is compatible with high-resolution audio formats. This allows users to connect various digital sources, including computers, CD players, and streaming devices, making it an ideal centerpiece for modern audio setups. The PRe6 supports a wide range of digital inputs, including USB, optical, coaxial, and AES/EBU, providing flexibility in connectivity. It can handle PCM resolutions up to 384 kHz and DSD up to 256, ensuring that even the most demanding audiophile will find it meets their needs.

Another notable characteristic of the PRe6 is its intuitive user interface. The elegant front panel features a large display that provides clear feedback on input selection and volume levels. The remote control further enhances usability, giving listeners the ability to adjust settings from across the room.

Additionally, the PRe6 is equipped with advanced features like a programmable volume control, which allows precise adjustments and integration into home automation systems. Its modular design enables easy upgrades, ensuring that the preamplifier can adapt to future advancements in audio technology.

In summary, the Bel Canto Design PRe6 is a high-performing preamplifier that embodies cutting-edge technology and superb craftsmanship. With its balanced architecture, extensive digital connectivity, and user-friendly interface, the PRe6 is poised to satisfy even the most discerning audio enthusiasts. Whether used in a dedicated listening room or a sophisticated home theater setup, the PRe6 delivers exceptional sound quality, ensuring a captivating musical experience.