Intel SE7230NH1-E, SR1475NH1-E manual Characters Are Distorted or Incorrect

Page 43

10.Make sure the memory DIMMs have been populated according to the system requirements.

11.Remove the memory DIMMs and re-seat them.

12.Make sure the processor(s) comply with the system requirements.

13.Make sure the processor(s) have been populated according to the system requirements.

14.Remove the processor(s) and re-seat them.

If you are using an add-in video controller board, do the following:

Verify that the video works using the onboard video controller.

Verify that the video controller board is fully seated in the server board connector.

Reboot the system for changes to take effect.

If there are still no characters on the screen after you reboot the system and POST emits a beep code, write down the beep code you hear. This information is useful for your service representative.

If you do not receive a beep code and characters do not appear, the video display monitor or video controller may have failed. Contact your service representative or authorized dealer for help.

Characters Are Distorted or Incorrect

Check the following:

1.Are the brightness and contrast controls properly adjusted on the video monitor? See the manufacturer’s documentation.

2.Are the video monitor’s signal and power cables properly installed?

3.Does this video monitor work correctly if plugged into a different system?

System Cooling Fans Do Not Rotate Properly

If the system cooling fans are not operating properly, it is an indication of possible system component failure.

Check the following:

1.Is the power-on light lit? If not, see “Power Light Does Not Light”

2.If your system has LED lights for the fans, is one or more of these LEDs lit?

3.Are any other front panel LEDs lit?

4.Have any of the fan motors stopped? Use the server management subsystem to check the fan status.

5.Have your fans speeded up in response to an overheating situation?

Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User’s Guide

27

Image 43
Contents Intel Order Number D23185-004 Disclaimer Manual Organization About this ManualAdditional Information and Software Product AccessoriesPage Page Safety Information Safety Information Contents Getting Help Regulatory and Compliance Information Xii Intel Server Board SE7230NH1-E List of FiguresXiv List of Tables Xvi Intel Server Board SE7230NH1-E Server Board FeaturesServer Board Features 5V only are not supported and one embedded Intel 10/100 C D E F G H I J K L M BB Y W GG FF EE DD CC AA Z Connector and Header LocationsConfiguration Jumpers Configuration JumpersACD F Back Panel ConnectorsProcessor Hardware RequirementsMemory Optional Hardware Power SupplyHard Disk Drives Setup Menus Using the Bios Setup UtilityStarting Setup If You Cannot Access SetupKeyboard Commands Obtaining the Upgrade Upgrading the BiosPreparing for the Upgrade Recording the Current Bios SettingsClearing the Cmos Upgrading the BiosTools and Supplies Needed Hardware Installations and UpgradesInstalling and Removing Memory Before You BeginInstalling DIMMs Installing DIMMsInstalling the Processor Installing or Replacing the ProcessorRemoving DIMMs Lift Processor Socket Lever Removing Protective Processor Cover Closing the Load Plate and Socket Lever Installing the Active Heat SinkInstalling the Active Heat Sink Installing the Passive Heat SinkRemoving a Processor Installing the Passive Heat SinkReplacing the Backup Battery Removing the Battery Resetting the System TroubleshootingProblems following Initial System Installation Hardware Diagnostic Testing Verifying Proper Operation of Key System Lights Specific Problems and Corrective ActionsConfirming Loading of the Operating System No Characters Appear on Screen Power Light Does Not LightSystem Cooling Fans Do Not Rotate Properly Characters Are Distorted or IncorrectCD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light Diskette Drive Activity Light Does Not LightCannot Connect to a Server System Boots when Installing PCI Card Problems with NetworkServer hangs when the drivers are loaded Diagnostics pass but the connection failsProblems with Newly Installed Application Software Hard Drives are not Recognized Bootable CD-ROM Is Not DetectedDevices are not Recognized under Device Manager LED InformationPost Error Beep Codes Bios Post Beep CodesWorld Wide Web Telephone Getting HelpCanada Europe Japan Asia-Pacific regionLatin America 800 621 Page English Safety InformationServer Safety Information Safety Warnings and CautionsEquipment Handling Practices Power and Electrical WarningsIntended Application Uses Site SelectionPower Cord Warnings System Access WarningsElectrostatic Discharge ESD Rack Mount WarningsLaser Peripherals or Devices Battery ReplacementOther Hazards Cooling and AirflowSicherheitshinweise für den Server DeutschSicherheitshinweise und Vorsichtsmaßnahmen Standortauswahl Zielbenutzer der AnwendungHandhabung von Geräten Hinweis für Netzkabel Warnungen zu Netzspannung und ElektrizitätWarnhinweise für den Systemzugang Elektrostatische Entladungen ESD Warnhinweise für RacksLaser-Peripheriegeräte oder -Komponenten Andere GefahrenBatterieaustausch Kühlung und LuftstromConsignes de sécurité sur le serveur FrançaisSécurité avertissements et mises en garde Domaines d’utilisation prévus Sélection d’un emplacementPratiques de manipulation de l’équipement Avertissements sur le cordon d’alimentation Alimentation et avertissements en matière d’électricitéAvertissements sur l’accès au système Décharges électrostatiques†ESD Avertissements sur le montage en rackPériphériques laser Remplacement de la pileAutres risques Refroidissement et ventilationInformación de seguridad del servidor EspañolAdvertencias y precauciones sobre seguridad Selección de la ubicación Aplicaciones y usos previstosManipulación del equipo Advertencias sobre el cable de alimentación Advertencias de alimentación y eléctricasAdvertencias el acceso al sistema Descarga electrostática ESD Advertencias sobre el montaje en bastidorEnfriamiento y circulación de aire Sustitución de la bateríaPeriféricos o dispositivos láser 简体中文 服务器安全信息 设备操作规范 系统使用警告 机架固定件警告 其他危险 Product EMC Compliance Class a Compliance Product Safety ComplianceRegulatory and Compliance Information Product Regulatory ComplianceProduct Regulatory Compliance Markings Certifications / Registrations / DeclarationsFCC USA Electromagnetic Compatibility NoticesEurope CE Declaration of Conformity Industry Canada ICES-003Taiwan Declaration of Conformity Bsmi Korean Compliance RRL Page Dimm Configuration Intel Server Issue Report FormBoard / Chassis Information Add-in Card, Peripheral, Video, NIC Operating System InformationManagement Information Hard Drive InformationComplete Problem Description

SR1475NH1-E, SE7230NH1-E specifications

The Intel SE7230NH1-E and SR1475NH1-E motherboards are pivotal components designed specifically for server and workstation environments, delivering exceptional performance, reliability, and scalability. These motherboards cater to the demands of enterprise-level applications, making them ideal for various computing needs, from database management to virtualization.

The Intel SE7230NH1-E is built on the Intel 5000P chipset, optimized to support dual Intel Xeon processors. This motherboard is engineered for businesses requiring substantial computational power, featuring up to 64GB of DDR2 memory support across eight DIMM slots. The integration of ECC (Error-Correcting Code) memory ensures enhanced data integrity and reliability, crucial for mission-critical applications.

On the other hand, the SR1475NH1-E motherboard offers a slightly different configuration while maintaining high performance. It supports the Intel Xeon 5100 and 5300 series processors, also featuring dual-socket capabilities for extensive workload management. With its advanced memory architecture, it provides support for DDR2 memory, boosting performance while ensuring fault tolerance through ECC support.

Both motherboards exhibit robust I/O capabilities, with multiple PCI Express slots and standard PCI slots, allowing extensive expansion options for network cards, RAID controllers, and other critical peripherals. Integrated SATA interfaces enable efficient storage solutions, facilitating hot-swappable drive capability, essential for maintaining uptime in server environments.

In terms of connectivity, the Intel SE7230NH1-E and SR1475NH1-E motherboards come equipped with Dual Gigabit Ethernet ports, providing seamless network connectivity and redundancy. This feature is vital for organizations that require constant network access and reliable data transfer rates.

The thermal management solutions embedded within these motherboards are also noteworthy, featuring active and passive cooling designs that ensure stable operation under high workloads. This is particularly crucial in server environments where prolonged performance can lead to overheating, potentially affecting hardware longevity.

Moreover, these motherboards support technologies such as Intel Virtualization Technology, enhancing the ability to run multiple operating systems on a single platform, thus optimizing resource usage.

In summary, the Intel SE7230NH1-E and SR1475NH1-E motherboards stand out due to their combination of compatibility, expandability, and resilience. They are engineered to meet the extensive requirements of modern enterprise computing, making them valuable assets for businesses seeking reliable server solutions.