System Access Warnings, Power Cord Warnings

unplugged. Make sure the AC power cord(s) is/are unplugged before you open the chassis, or add or remove any non hot-plug components.

Do not attempt to modify or use an AC power cord if it is not the exact type required. A separate AC cord is required for each system power supply.

Some power supplies in Intel® servers use Neutral Pole Fusing. To avoid risk of shock use caution when working with power supplies that use Neutral Pole Fusing.

The power supply in this product contains no user-serviceable parts. Do not open the power supply. Hazardous voltage, current and energy levels are present inside the power supply. Return to manufacturer for servicing.

When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced before removing it from the server.

To avoid risk of electric shock, turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it.

Power Cord Warnings

If an AC power cord was not provided with your product, purchase one that is approved for use in your country.

Caution: To avoid electrical shock or fire, check the power cord(s) that will be used with the product as follows:

•Do not attempt to modify or use the AC power cord(s) if they are not the exact type required to fit into the grounded electrical outlets

•The power cord(s) must meet the following criteria:

•The power cord must have an electrical rating that is greater than that of the electrical current rating marked on the product.

•The power cord must have safety ground pin or contact that is suitable for the electrical outlet.

•The power supply cord(s) is/are the main disconnect device to AC power. The socket outlet(s) must be near the equipment and readily accessible for disconnection.

•The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided with a suitable earth ground.

System Access Warnings

Caution: To avoid personal injury or property damage, the following safety instructions apply whenever accessing the inside of the product:

•Turn off all peripheral devices connected to this product.

•Turn off the system by pressing the power button to off.

•Disconnect the AC power by unplugging all AC power cords from the system or wall outlet.

Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User’s Guide

SR1475NH1-E, SE7230NH1-E specifications

The Intel SE7230NH1-E and SR1475NH1-E motherboards are pivotal components designed specifically for server and workstation environments, delivering exceptional performance, reliability, and scalability. These motherboards cater to the demands of enterprise-level applications, making them ideal for various computing needs, from database management to virtualization.

The Intel SE7230NH1-E is built on the Intel 5000P chipset, optimized to support dual Intel Xeon processors. This motherboard is engineered for businesses requiring substantial computational power, featuring up to 64GB of DDR2 memory support across eight DIMM slots. The integration of ECC (Error-Correcting Code) memory ensures enhanced data integrity and reliability, crucial for mission-critical applications.

On the other hand, the SR1475NH1-E motherboard offers a slightly different configuration while maintaining high performance. It supports the Intel Xeon 5100 and 5300 series processors, also featuring dual-socket capabilities for extensive workload management. With its advanced memory architecture, it provides support for DDR2 memory, boosting performance while ensuring fault tolerance through ECC support.

Both motherboards exhibit robust I/O capabilities, with multiple PCI Express slots and standard PCI slots, allowing extensive expansion options for network cards, RAID controllers, and other critical peripherals. Integrated SATA interfaces enable efficient storage solutions, facilitating hot-swappable drive capability, essential for maintaining uptime in server environments.

In terms of connectivity, the Intel SE7230NH1-E and SR1475NH1-E motherboards come equipped with Dual Gigabit Ethernet ports, providing seamless network connectivity and redundancy. This feature is vital for organizations that require constant network access and reliable data transfer rates.

The thermal management solutions embedded within these motherboards are also noteworthy, featuring active and passive cooling designs that ensure stable operation under high workloads. This is particularly crucial in server environments where prolonged performance can lead to overheating, potentially affecting hardware longevity.

Moreover, these motherboards support technologies such as Intel Virtualization Technology, enhancing the ability to run multiple operating systems on a single platform, thus optimizing resource usage.

In summary, the Intel SE7230NH1-E and SR1475NH1-E motherboards stand out due to their combination of compatibility, expandability, and resilience. They are engineered to meet the extensive requirements of modern enterprise computing, making them valuable assets for businesses seeking reliable server solutions.