Chauvet DMX512 user service Action, Physical Fader Assignment Optional Setup

PHYSICAL FADER ASSIGNMENT (OPTIONAL SETUP)

Use this feature to combine or unify fixture control attributes for different fixtures. For example; if you were controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels may not line up ideally on the physical faders. Use this function to re-assign the dimmer, color and gobo channels to faders 1, 2 and 3. From now on you will be able to control the same attributes on all

fixtures using the same fader location.

Action

1)Press and hold PROGRAM & TAPSYNC buttons together (1) time to access the channel assignment mode.

2)Press a FIXTURE button that represents the fixture whose faders you would like to re-assign.

3)Move the SPEED fader until you arrive at controller channel (number).

4)Move the FADE TIME fader to select the DMX channel.

5)Make all changes, and the press the MIDI/ADD button to confirm setting.

6)Repeat steps 3 ~ 5 as often as necessary.

If you wish to copy a scanner’s physical assignments to another scanner, continue by following steps 7-13. If you do not wish to do this, press and hold PROGRAM & TAPSYNC buttons

(2) times to exit mode.

Example: Copying Scanner 1 into Scanner 2

7)Press and hold FIXTURE button # 1.

8)While holding button # 1 press FIXTURE button # 2.

9)While holding FIXTURE buttons # 1 and # 2, press and hold MIDI/ADD button.

10)Release FIXTURE button # 1 first before releasing FIXTURE button # 2.

11)Release MIDI/ADD button.

12)All FIXTURE LED indicators will flash to confirm successful copy.

13)Press and hold PROGRAM & TAPSYNC buttons (2) times to exit mode.

Notes

All physical faders can be re-assigned to output on a different DMX channel. Faders are given a channel number and are labeled on the surface of the controller as such.

Obey™ 40 User Manual 9 Revised: 2008-06-13 15:54:24