Intel manual Appendix A. Base Model 0 Systems Configuration, NSW1U Production SKU Configuration

Appendix A. Base Model 0 Systems Configuration

All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or plug-in adapters are provided). Those components must be ordered separately as Accessories from Intel or from third party vendors listed in the Tested Hardware and Operating System List (THOL). The below table lists how many of each component is included in the Production model 0 SKU.

NSW1U Production SKU Configuration

	Configuration	Configuration
Component Description	AC SKU	DC SKU
Chassis (bezel, sheet metal, top cover, PCI	1	1
carrier)
S5000PHB Baseboard	1	1
(Dual-Core Intel® Xeon® Processor 5100
Series with 4M L2 cache, and 1066MHz and
1333MHz FSB) – CPUs not included
FH-FL Bracket with PCI-Express Riser	1	1
AC power supply (450W)	1	-
DC power supply (450W)	-	1
Power Supply Filler Panel	1	1
SATA HDD Carrier	2	2
Server Deployment Toolkit (CD)	1	1
Quick Start Guide	1	1
Power cable1	Purchase separately	Purchase separately
CD-ROM Carrier	Optional Accessory	Optional Accessory
PCI-X Riser2	Optional Accessory	Optional Accessory
Syscon Board2	Optional Accessory	Optional Accessory
Intel® Remove Management Module 22	Optional Accessory	Optional Accessory
NIC Cable2	Optional Accessory	Optional Accessory
Cable Management Bracket2	Optional Accessory	Optional Accessory
Bypass Ethernet Ports3	Optional Accessory	Optional Accessory
Rack Mount Kits4	Optional Accessory	Optional Accessory

Some items above available as optional accessories as noted: 1Refer to AC power cord accessory in section III

2Refer to “Production Spares/Accessory List” in section IV

3Refer to “Adding Bypass Ports” in section V

4Refer to “Rack Mounts” in Appendix B

Note: For these SKUs to be functional, one or more of the following is

required: Power cord, CPU, Memory, Hard Drive, Operating System, Heatsinks

5/18/2007 v1.2 13 of 21