Intel S875WP1-E manual Memory, Supported Processors, Type Designation System Bus L2 Cache Size

Page 13

Processor

The S875WP1-E server board supports a single Intel Pentium 4 processor with an mPGA478 socket. The processor connects to the server board through the mPGA478 socket. The Intel Pentium 4 processor can be removed and replaced to accommodate a supported higher speed processor.

The server board S875WP1-E supports the following processors.

Table 2. Supported Processors

Type

Designation

System Bus

L2 Cache Size

 

 

 

 

Pentium 4 processor with Hyper-

2.40, 2.60, 2.80, and 3.0 GHz

800 MHz

512 KB

threading (HT) Technology

 

 

 

3.06 GHz

533 MHz

512 KB

 

 

 

 

 

Pentium 4 processor

2.0, 2.26, 2.4B, 2.53, 2.66, and

533 MHz

512 KB

 

2.80 GHz

 

 

 

 

 

 

 

2.0, 2.4 GHz

400 MHz

512 KB

 

 

 

 

NOTE

The processor is not included with the server board and must be purchased separately.

Memory

The S875WP1-E server board contains four 184-pin DIMM sockets and supports up to four DDR SDRAM DIMMs. The minimum supported memory configuration is 128 MB and the maximum configurable memory size is 4 GB with stacked unbuffered DDR266/333/400 ECC DIMMs.

Supported memory configurations are as follows:

Up to four dual-channel 184-pin Double Data Rate (DDR) SDRAM DIMMs connectors with gold-plated contacts. Supported memory configuration are:

DDR400: to run DDR400 memory at full speed requires an Intel Pentium 4 processor with 800 MHz front side bus (FSB) frequency.

DDR333: to run DDR333 memory at full speed requires an Intel Pentium 4 processor with 533 MHz FSB frequency. DDR333 memory will run at 320 MHz frequency when using an Intel Pentium 4 processor with 800 MHz FSB frequency.

DDR266: DDR266 memory may only be used with an Intel Pentium 4 processor with 400 MHz or 533 MHz FSB frequency only.

Support for:

Single-channel memory

Unbuffered, single or double-sided DIMMs

Serial Presence Detect (SPD) memory only

Support for Suspend to RAM (STR), S3 ACPI state

ECC and non-ECC RAM

2.5 V memory

Server Board Features

13

Image 13
Contents Intel Server Board S875WP1-E Product Guide Disclaimer Important Safety InstructionsContents Bios Server Board Installation and Upgrades101 Configuration Software and UtilitiesIndustry Canada ICES-003 Regulatory and Integration Information 107Tables FiguresFan Control Configuration Submenu Feature Description Server Board FeaturesLAN SdramBios Server Board Components Server Board Connector and Component LocationsFront Panel Connectors Back Panel ConnectorsMemory ProcessorSupported Processors Type Designation System Bus L2 Cache SizeIntel 82875P Memory Controller Hub MCH Intel 875P ChipsetIntel 82801EB I/O Controller Hub ICH5-R VideoIntel 82802AC Firmware Hub FWH ATA Rage XL Video Controller AGP ConnectorVideo Modes Video ModesVideo Memory Interface Super I/OSerial Port Keyboard and Mouse ConnectorsParallel Port Floppy Drive ControllerLegacy USB Support High-Speed USB 2.0 SupportPCI I/O Subsystem PCI Bus Characteristics32-bit, 33-MHz PCI Subsystem Data Storage PCI Bus Configuration IDsSerial ATA Sata Device IDs IdselIDE Interfaces Scsi Hard Drive Activity LED Connector10/100 Ethernet LAN Connector LEDs NIC Connector and Status LEDsNetwork Interface Controller NIC LED Color LED State Indicates10/100/1000 Gigabit Ethernet LAN Connector LEDs Power ManagementSoftware Support through Acpi Effects of Pressing the Power Switch under Acpi Wake-up Devices and Events Wake-up Devices and EventsUSB Resume on Ring Hardware SupportFan Connectors Power ConnectorFan Connector Function/Operation Connector DescriptionInstantly Available PC Technology Location of the Standby Power Indicator LED CR7J1Chassis Intrusion and Detection Hardware Management and MonitoringSupervisor and User Password Functions Password SecurityRecovering the Cmos Real-Time Clock, Cmos SRAM, and BatteryIDE Auto Configuration PCI Auto ConfigurationLanguage Support Bios UpdatesBoot Options Recovering Bios DataCD-ROM and Network Boot Custom Splash ScreenBooting Without Attached Devices Fast Booting Systems with Intel Rapid Bios BootIntel Rapid Bios Boot Smbios System Management Bios SmbiosPage Before You Begin Tools and Supplies NeededEmissions Disclaimer Intel Server Board S875WP1-E Product Guide Installing the I/O Shield Installing the I/O ShieldIntel Server Chassis SC5200 Installing Chassis StandoffsIntel Server Chassis SC5250-E Installing Chassis Standoffs in the SC5250-E ChassisPlacing the Server Board into the Chassis Installing the Server BoardAttaching the Server Board Attaching the Server Board Installing the ProcessorAttaching the Heat Sink to the Processor Attaching the Fan Heat Sink Clips to the Processor Socket Removing the Processor Dimm Installation Guidelines Installing and Removing MemoryDimm Socket Locations Installing DIMMsRemoving DIMMs Installing and Removing an AGP CardRemoving the AGP Card Installing an AGP CardConnecting the IDE Cable Connecting the IDE CableConnecting the Sata Cable Connecting the Serial ATA Cable OptionalConnecting the Front Panel Header Connecting Internal HeadersPin Signal Name Pins Function Front Panel Header J7J1Pin Signal name Connecting the USB 2.0 HeaderUSB 2.0 Header J7E1 Location of the Fan Headers and Power Connectors Connecting Hardware Control and Power CablesConnecting Fans Setting the Bios Configuration JumperConnecting Power Cables Chassis IntrusionJumper Settings for the Bios Setup Program Modes J8J2 Clearing PasswordsJumper Setting Mode Description Precaution Replacing the BatteryVaro Removing the Battery Obtaining the Bios Update File Updating the Bios with the Intel Flash Memory Update UtilityCreating Bootable Media Recording the Current Bios SettingsLICENSE.TXT BIOINSTR.TXT BIOS.EXE MKBOOTZ.EXE Creating a Bios Update MediaUpdating the Bios Recovering the Bios Bios Setup Program Modes Using the Setup ProgramBios Setup Program Function Keys Maintenance MenuMaintenance Menu Bios Setup Program Function Key DescriptionMain Menu Main MenuECC Advanced Menu Advanced MenuPCI Configuration Submenu PCI Configuration SubmenuBoot Configuration Submenu Boot Configuration SubmenuPeripheral Configuration Submenu Peripheral Configuration SubmenuIRQ AskirDefault Auto defaultIRQ 7 default Enabled DefaultDrive Configuration Submenu Drive Configuration SubmenuATA / IDE Drive Configuration Submenu Primary/Secondary/SATA-0/SATA-1 Master/Slave Submenus Primary/Secondary/SATA-0/SATA-1 Master/Slave SubmenusFloppy Configuration Submenu Floppy Configuration SubmenuA.R.T Event Log Configuration Submenu Event Log Configuration SubmenuVideo Configuration Submenu Video Configuration Submenu4MB 8MBUSB Configuration Submenu USB Configuration SubmenuChipset Configuration Submenu Chipset Configuration SubmenuChipset Configuration Submenu Fan Control Configuration Submenu Fan Control Configuration SubmenuHardware Monitoring Submenu Hardware Monitoring SubmenuRemote Access Configuration Submenu Remote Access Configuration SubmenuCOM2 Security Menu Security MenuPower Menu Power MenuAcpi Submenu Acpi SubmenuBoot Menu Boot MenuBoot Device Priority Submenu Boot Device Priority SubmenuHard Disk Drives Submenu Hard Disk Drives SubmenuAtapi Cdrom Drives Submenu Removable Devices SubmenuRemovable Devices Submenu Atapi Cdrom Drives SubmenuExit Menu Exit MenuPage Beep Codes Bios Beep CodesNumber of Beeps Description Bios Error Messages Bios Error MessagesError Message Explanation Nvram / Cmos / Password Page U.S. and Canada Europe World Wide Web TelephoneAsia-Pacific region JapanPage Technical Reference Server Board ConnectorsPower, Fan, Chassis Intrusion Connectors Baseboard ConnectorsAdd-in Board and Peripheral Interface Connectors Add-In Board and Peripheral Interface ConnectorsMemory Map Server Board ResourcesDMA Channels System Memory MapO Map MapAddress hex Size Description Interrupts InterruptsNMI COM2 COM1Product Regulatory Compliance Product Safety ComplianceProduct EMC Compliance Product Certification Markings Product Regulatory Compliance MarkingsFCC USA Electromagnetic Compatibility NoticesEurope CE Declaration of Conformity Industry Canada ICES-003Taiwan Declaration of Conformity Korean RRL ComplianceInstallation Requirements Installation PrecautionsPrevent Power Supply Overload Use Only for Intended Applications Place Battery Marking

S875WP1-E specifications

The Intel S875WP1-E is a high-performance server motherboard designed to meet the demanding requirements of enterprise-level applications. It is ideally suited for those seeking a robust solution for data centers, cloud computing, and various business applications. Built on the Intel 875P chipset, the S875WP1-E delivers impressive features and technologies that enhance functionality and reliability.

One of the standout characteristics of the Intel S875WP1-E is its support for dual Intel Xeon processors. This allows for significant processing power, enabling businesses to run multiple applications simultaneously without compromising performance. With its dual-socket configuration, the motherboard supports a range of Xeon processors, maximizing scalability for evolving workloads.

The motherboard supports up to 16GB of DDR SDRAM, utilizing ECC (Error-Correcting Code) memory, which ensures data integrity and system stability. The capability to handle large amounts of memory is critical for applications requiring high data throughput and reliability, such as virtualization and database management.

In terms of storage, the S875WP1-E features several Serial ATA (SATA) ports, supporting RAID configurations, which can enhance data redundancy and performance. This flexibility in storage options ensures that businesses can tailor their systems according to specific storage needs. Additionally, it also supports PATA (Parallel ATA) drives, allowing for integration of legacy systems.

The expansion capabilities of the S875WP1-E are notable, as it includes multiple PCI Express and PCI slots, accommodating various expansion cards, including graphics cards, network interfaces, and storage controllers. This versatility is essential for organizations looking to customize their systems based on specific application requirements.

Networking capability is another highlight of the Intel S875WP1-E. It comes equipped with integrated Gigabit Ethernet, providing fast network access essential for server operations. The motherboard also features additional options for network expansion, ensuring that businesses can connect seamlessly to their networks.

Thermal management is another strong aspect of the S875WP1-E design. With a range of features aimed at maintaining optimal operating temperatures, including robust power regulation, it helps to prolong the lifespan of components and enhance overall system reliability.

In summary, the Intel S875WP1-E motherboard is a powerful solution for enterprise environments, offering dual processor support, ample memory capacity, flexible storage options, and comprehensive networking capabilities. Its design prioritizes stability and performance, making it an ideal choice for those looking to build a reliable server infrastructure tailored to their organization's needs.