Intel S875WP1-E Fast Booting Systems with Intel Rapid Bios Boot, Booting Without Attached Devices

Page 36

Booting Without Attached Devices

For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present:

Video adapter

Keyboard

Mouse

Fast Booting Systems with Intel® Rapid BIOS Boot

These factors affect system boot speed:

Selecting and configuring peripherals properly

Using an optimized BIOS, such as the Intel Rapid BIOS

Intel Rapid BIOS Boot

Using the following BIOS Setup program settings reduces the POST execution time. In the Boot Menu:

Set the hard disk drive as the first boot device. As a result, the POST does not first seek a diskette drive, which saves about one second from the POST execution time.

Disable Quiet Boot, which eliminates display of the logo splash screen. This could save several seconds of painting complex graphic images and changing video modes.

Enabled Intel® Rapid BIOS Boot. This feature bypasses memory count and the search for a diskette drive.

NOTE

It is possible to optimize the boot process to the point where the system boots so quickly that the Intel logo screen (or a custom logo splash screen) will not be seen. Monitors and hard disk drives with minimum initialization times can also contribute to a boot time that might be so fast that necessary logo screens and POST messages cannot be seen.

This boot time may be so fast that some drives might be not be initialized at all. If this condition should occur, it is possible to introduce a programmable delay ranging from three to 30 seconds (using the Hard Disk Pre-Delay feature of the Advanced Menu in the Drive Configuration Submenu of the BIOS Setup program).

36

Intel Server Board S875WP1-E Product Guide

Image 36
Contents Intel Server Board S875WP1-E Product Guide Important Safety Instructions DisclaimerContents Server Board Installation and Upgrades BiosConfiguration Software and Utilities 101Regulatory and Integration Information 107 Industry Canada ICES-003Figures TablesFan Control Configuration Submenu Server Board Features Feature DescriptionLAN SdramBios Server Board Connector and Component Locations Server Board ComponentsBack Panel Connectors Front Panel ConnectorsProcessor MemorySupported Processors Type Designation System Bus L2 Cache SizeIntel 875P Chipset Intel 82875P Memory Controller Hub MCHVideo Intel 82801EB I/O Controller Hub ICH5-RIntel 82802AC Firmware Hub FWH AGP Connector ATA Rage XL Video ControllerVideo Modes Video ModesSuper I/O Video Memory InterfaceKeyboard and Mouse Connectors Serial PortParallel Port Floppy Drive ControllerHigh-Speed USB 2.0 Support Legacy USB SupportPCI Bus Characteristics PCI I/O Subsystem32-bit, 33-MHz PCI Subsystem PCI Bus Configuration IDs Data StorageSerial ATA Sata Device IDs IdselScsi Hard Drive Activity LED Connector IDE InterfacesNIC Connector and Status LEDs 10/100 Ethernet LAN Connector LEDsNetwork Interface Controller NIC LED Color LED State IndicatesPower Management 10/100/1000 Gigabit Ethernet LAN Connector LEDsSoftware Support through Acpi Effects of Pressing the Power Switch under Acpi Wake-up Devices and Events Wake-up Devices and EventsUSB Hardware Support Resume on RingPower Connector Fan ConnectorsFan Connector Function/Operation Connector DescriptionLocation of the Standby Power Indicator LED CR7J1 Instantly Available PC TechnologyHardware Management and Monitoring Chassis Intrusion and DetectionPassword Security Supervisor and User Password FunctionsReal-Time Clock, Cmos SRAM, and Battery Recovering the CmosPCI Auto Configuration IDE Auto ConfigurationBios Updates Language SupportRecovering Bios Data Boot OptionsCD-ROM and Network Boot Custom Splash ScreenFast Booting Systems with Intel Rapid Bios Boot Booting Without Attached DevicesIntel Rapid Bios Boot System Management Bios Smbios SmbiosPage Tools and Supplies Needed Before You BeginEmissions Disclaimer Intel Server Board S875WP1-E Product Guide Installing the I/O Shield Installing the I/O ShieldInstalling Chassis Standoffs Intel Server Chassis SC5200Installing Chassis Standoffs in the SC5250-E Chassis Intel Server Chassis SC5250-EInstalling the Server Board Placing the Server Board into the ChassisAttaching the Server Board Installing the Processor Attaching the Server BoardAttaching the Heat Sink to the Processor Attaching the Fan Heat Sink Clips to the Processor Socket Removing the Processor Installing and Removing Memory Dimm Installation GuidelinesInstalling DIMMs Dimm Socket LocationsInstalling and Removing an AGP Card Removing DIMMsInstalling an AGP Card Removing the AGP CardConnecting the IDE Cable Connecting the IDE CableConnecting the Serial ATA Cable Optional Connecting the Sata CableConnecting Internal Headers Connecting the Front Panel HeaderPin Signal Name Pins Function Front Panel Header J7J1Connecting the USB 2.0 Header Pin Signal nameUSB 2.0 Header J7E1 Connecting Hardware Control and Power Cables Location of the Fan Headers and Power ConnectorsSetting the Bios Configuration Jumper Connecting FansConnecting Power Cables Chassis IntrusionClearing Passwords Jumper Settings for the Bios Setup Program Modes J8J2Jumper Setting Mode Description Replacing the Battery PrecautionVaro Removing the Battery Updating the Bios with the Intel Flash Memory Update Utility Obtaining the Bios Update FileRecording the Current Bios Settings Creating Bootable MediaCreating a Bios Update Media LICENSE.TXT BIOINSTR.TXT BIOS.EXE MKBOOTZ.EXEUpdating the Bios Recovering the Bios Using the Setup Program Bios Setup Program ModesMaintenance Menu Bios Setup Program Function KeysMaintenance Menu Bios Setup Program Function Key DescriptionMain Menu Main MenuECC Advanced Menu Advanced MenuPCI Configuration Submenu PCI Configuration SubmenuBoot Configuration Submenu Boot Configuration SubmenuPeripheral Configuration Submenu Peripheral Configuration SubmenuIRQ AskirAuto default DefaultIRQ 7 default Enabled DefaultDrive Configuration Submenu Drive Configuration SubmenuATA / IDE Drive Configuration Submenu Primary/Secondary/SATA-0/SATA-1 Master/Slave Submenus Primary/Secondary/SATA-0/SATA-1 Master/Slave SubmenusFloppy Configuration Submenu Floppy Configuration SubmenuA.R.T Event Log Configuration Submenu Event Log Configuration SubmenuVideo Configuration Submenu Video Configuration Submenu4MB 8MBUSB Configuration Submenu USB Configuration SubmenuChipset Configuration Submenu Chipset Configuration SubmenuChipset Configuration Submenu Fan Control Configuration Submenu Fan Control Configuration SubmenuHardware Monitoring Submenu Hardware Monitoring SubmenuRemote Access Configuration Submenu Remote Access Configuration SubmenuCOM2 Security Menu Security MenuPower Menu Power MenuAcpi Submenu Acpi SubmenuBoot Menu Boot MenuBoot Device Priority Submenu Boot Device Priority SubmenuHard Disk Drives Submenu Hard Disk Drives SubmenuRemovable Devices Submenu Atapi Cdrom Drives SubmenuRemovable Devices Submenu Atapi Cdrom Drives SubmenuExit Menu Exit MenuPage Bios Beep Codes Beep CodesNumber of Beeps Description Bios Error Messages Bios Error MessagesError Message Explanation Nvram / Cmos / Password Page World Wide Web Telephone U.S. and Canada EuropeAsia-Pacific region JapanPage Server Board Connectors Technical ReferenceBaseboard Connectors Power, Fan, Chassis Intrusion ConnectorsAdd-In Board and Peripheral Interface Connectors Add-in Board and Peripheral Interface ConnectorsServer Board Resources Memory MapDMA Channels System Memory MapMap O MapAddress hex Size Description Interrupts InterruptsNMI COM2 COM1Product Safety Compliance Product Regulatory ComplianceProduct EMC Compliance Product Regulatory Compliance Markings Product Certification MarkingsElectromagnetic Compatibility Notices FCC USAIndustry Canada ICES-003 Europe CE Declaration of ConformityTaiwan Declaration of Conformity Korean RRL ComplianceInstallation Precautions Installation RequirementsPrevent Power Supply Overload Place Battery Marking Use Only for Intended Applications

S875WP1-E specifications

The Intel S875WP1-E is a high-performance server motherboard designed to meet the demanding requirements of enterprise-level applications. It is ideally suited for those seeking a robust solution for data centers, cloud computing, and various business applications. Built on the Intel 875P chipset, the S875WP1-E delivers impressive features and technologies that enhance functionality and reliability.

One of the standout characteristics of the Intel S875WP1-E is its support for dual Intel Xeon processors. This allows for significant processing power, enabling businesses to run multiple applications simultaneously without compromising performance. With its dual-socket configuration, the motherboard supports a range of Xeon processors, maximizing scalability for evolving workloads.

The motherboard supports up to 16GB of DDR SDRAM, utilizing ECC (Error-Correcting Code) memory, which ensures data integrity and system stability. The capability to handle large amounts of memory is critical for applications requiring high data throughput and reliability, such as virtualization and database management.

In terms of storage, the S875WP1-E features several Serial ATA (SATA) ports, supporting RAID configurations, which can enhance data redundancy and performance. This flexibility in storage options ensures that businesses can tailor their systems according to specific storage needs. Additionally, it also supports PATA (Parallel ATA) drives, allowing for integration of legacy systems.

The expansion capabilities of the S875WP1-E are notable, as it includes multiple PCI Express and PCI slots, accommodating various expansion cards, including graphics cards, network interfaces, and storage controllers. This versatility is essential for organizations looking to customize their systems based on specific application requirements.

Networking capability is another highlight of the Intel S875WP1-E. It comes equipped with integrated Gigabit Ethernet, providing fast network access essential for server operations. The motherboard also features additional options for network expansion, ensuring that businesses can connect seamlessly to their networks.

Thermal management is another strong aspect of the S875WP1-E design. With a range of features aimed at maintaining optimal operating temperatures, including robust power regulation, it helps to prolong the lifespan of components and enhance overall system reliability.

In summary, the Intel S875WP1-E motherboard is a powerful solution for enterprise environments, offering dual processor support, ample memory capacity, flexible storage options, and comprehensive networking capabilities. Its design prioritizes stability and performance, making it an ideal choice for those looking to build a reliable server infrastructure tailored to their organization's needs.