ViewSonic PJ1158 manual Using as a wired remote control, Using as a simple PC mouse & keyboard

LASER INDICATOR

Using as a wired remote control

The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs.

When the remote control signal is hard to reach surely to the projector in the environment, this function is effective.

Remote control

		REMOTE
	AUDIO	CONTROL
L	OUT	(3.5Φ)
O IN 4

NOTE • To connect the remote control with the projector, use an audio cable with 3.5 diameter stereo mini plugs.

Using as a simple PC mouse & keyboard

The accessory remote control works as a simple mouse and keyboard of the PC, when an M1-D/USB cable con- nects this projector’s M1-D port with the PC’s DVI-D and USB (A type) ports.

(1) Mouse left button

Pushing the button into the center point works instead of clicking the mouse's left button.

Tilting this button to one of eight directions moves the PC's move pointer on the screen in the direction.

(2) Mouse right button

Pressing the button works instead of clicking the mouse’s right button.

(3) Lever switch

Sliding toward the side marked ▲ works instead of the	STANDBY/ON VIDEO		RGB
[↑] key on the keyboard. Sliding toward the side marked	BLANK		LASER
▼ works instead of the [↓] key on the keyboard.
(4) Cursor button ◄	ASPECT
This button works instead of the [←] key on the key-	ENTER
	PAGE UP		PAGE DOWN
board.	ESC	MENU	RESET
	POSITION	AUTO
(5) Cursor button ►	MAGNIFY	MY BUTTON VOLUME
	ON	1
			MUTE
This button works instead of the [→] key on the keyboard.	OFF	2
	FREEZE	KEYSTONE SEARCH

(6)PAGE UP button

This button works instead of the PAGE UP key on the key board.

(7)PAGE DOWN button

This button works instead of the PAGE DOWN key on the key board.

to a signal

source

	BLANK	LASER
(1)
(3)			(2)
	ASPECT
(4)	PUSH ENTER		(5)
(6)	PAGE UP	PAGE DOWN	(7)
	ESC	MENU RESET
	POSITION	AUTO

NOTE • When the simple mouse & keyboard function of this product does not work correctly, please check the following.

-When an M1-D/USB cable connects this projector with a PC having a built-in pointing device (e.g. track ball) like a notebook PC, open BIOS setup menu, then select the external mouse and disable the built-in pointing device, because the built-in pointing device may have priority to this function.

-Windows 95 OSR 2.1 or higher is required for this function. And also this function may not work depending on the PC’s configurations and mouse drivers.

-Operating simultaneously two or more keys is void except for mouse drag and drop operation.

-This function is activated only when the projector is working properly.

ViewSonic PJ1158 15