ViewSonic PJ1158 manual Date/Time setting can be adjusted via a web browser

Page 89

Controlling the Projector via Scheduling

Date/Time Settings

The Date/Time setting can be adjusted via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter [https://192.168.1.10] into the address bar of the web browser. Enter the Administrator ID and Password and click [Logon].

2)Click [Date/Time Settings] on the main menu and configure each item. Refer to the [Date/Time Settings] item in [Configuring and Controlling the Pro- jector via a Web Browser] for further information.

3)Click the [Apply] button to save the settings.

NOTE • A Network Restart is required after the Daylight Savings Time or SNTP configuration settings have been changed.

•The battery for the built in clock may be dead if the clock loses time even when the DATE and TIME have been set correctly. Replace the battery by fol- lowing the instructions on replacing the battery.

•The Internal Clock’s time may not remain accurate. Using SNTP is recom- mended to maintain accurate time.

ViewSonic

PJ1158

84

Page 88 Page 90
Image 89
Page 88 Page 90
Contents ViewSonic Compliance Information Important Safety Instructions Substance Proposed Maximum Actual Concentration Declaration of RoHS ComplianceProduct Registration For Your Records Copyright InformationAbout this manual Contents of packagePreparations ContentFastening the lens cover Contents of packageProjector Part namesHOT!4 HOTRear panel Control panel18 9 10 11 15 16Back Remote control Remote controlLaser pointer It is a beam outletSetting up On a horizontal surface ArrangementSuspended from the ceiling DownUsing the security bar and slot Adjusting the projectors elevatorSecurity bar Anti-theft chain or wire Security slot FootVCR/DVD player Connecting your devicesSignal source Remote control Speakers About Plug-and-Play capability Connecting your devicesAC inlet Connector of the power cord to the outlet Connecting power supplyLaser pointer Remote controlPutting batteries Laser buttonChanging the frequency of remote control signal About the remote control signalFront and top sensors Back sensorUsing as a simple PC mouse & keyboard Using as a wired remote controlTurning off the power Power on/offTurning on the power Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundSelecting an aspect ratio Searching an input signalSelecting an input signal Adjusting the lens shift Adjusting the zoom and focusUsing the automatic adjustment feature  For a video signal or s-video signalCorrecting the keystone distortions Adjusting the positionTion.Use the cursor buttons /// to adjust the picture posi Freezing the screen Using the magnify featureTemporarily blanking the screen Easy Menu Using the menu functionAdvanced Menu Enter buttonEasy Menu Easy Menu Gamma Picture MenuColor Temp Picture MenuLOAD1, LOAD2, LOAD3, LOAD4 Active IrisMY Memory SAVE1, SAVE2, SAVE3, SAVE4Position Image MenuOver Scan Auto Adjust PhaseImage Menu SizeProgressive Input Menu3D-YCS Color SpaceComponent Input MenuVideo Format M1-DFrame Lock Input signal type Sync on G on ó Sync on G OFFPort to be set Use the / buttons to select the RGB RGBResolution Menu ResolutionSetup Menu Normal ó Whisper Setup MenuNess are reduced Normal ó Hinvert ó Vinvert ó H&VINVERTAudio Menu Blank Screen MenuStart UP Screen MenuMyScreen Capturing error has occurred. Please try againMyScreen registration is finished MyScreen LockSource Name MessageAuto on Option MenuAuto Search Lamp Time Option MenuAuto OFF FAN Speed ServiceMY Button Lens Type GhostFilter Message KEY Lock Factory ResetRemote Receiv Remote FreqInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off If you have forgotten your PIN Code Turning Off the PIN Lock FunctionTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off Network Menu Default GateIP Address Subnet MaskControlling the Projector via a Web Browser for Sntp set Network MenuInformation display Use the or Enter buttons to view net Work information and confirm settingsProjector Management via Snmp Failure & Warning Alerts via E-mailControlling the Projector via Scheduling Still Image TransferIf using a network with Dhcp enabled Before using the network functions…Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon with administrator ID SettingsDhcp Displays the Dhcp configuration settingsNetwork Information Dhcp OFF Network SettingsDhcp on Port Settings Mail Settings Alert Settings Lamp Error Alert SettingsTemp Error Air Flow ErrorFilter Error Lamp Time ErrorCool Error Schedule Execution Error Other ErrorLamp Time Alarm Alarm TimeChange Displays and configures schedule settings Schedule SettingsSchedule Setting Displays and configures the date and time settings Date/Time SettingsSntp Date/Time SettingsSecurity Settings Snmp Security SettingsProjector Control Projector ControlProjector Control Option Audio DescriptionScreen Network Restart Projector StatusLogoff Description RestartExample If the IP address of the projector is set to Failure & Warning Alerts via E -mailMail Settings Projector management via Snmp Snmp settingsControlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Schedule settings can be configured from a web browser Communication Port Shot Still Image Transfer SettingsShot Still Image Transfer Display Shot Still Image Transfer Transmission Shot Still Image Transfer SettingsCommand Control Settings Command Control via the NetworkCommand Control Settings Reply Error code Command formatData RS-232Ccommand Send Data formatReply Data format Automatic Connection Break AuthenticationCase of replacement by yourself MaintenanceLamp Type number = RLC-021 Replacing the lampLamp Air filter Cleaning the air filterAir filter Ing the battery cover, pick its knob Internal clock batteryTake the old battery out Will come up. Remove the battery Put a new batteryPJ1158 There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workAudio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableEither the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product life TimeSpecification Warranty and after-servicePJ1158 106 SpecificationsPJ1158 107 Customer SupportPJ1158 108 Limited WarrantyPJ1158 109 Limitation of implied warranties

PJ1158 specifications

The ViewSonic PJ1158 is a versatile and powerful projector designed to meet the demands of both business and educational environments. Known for its impressive performance and user-friendly features, the PJ1158 stands out as a reliable tool for presentations, lectures, and multimedia presentations.

One of the main features of the PJ1158 is its high brightness capability. With a brightness level of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit rooms. This is crucial for environments where ambient light cannot be completely controlled, making the PJ1158 an excellent choice for conference rooms, classrooms, and auditoriums.

The resolution of the ViewSonic PJ1158 is another highlight, as it supports native XGA (1024x768) resolution. This level of clarity allows for detailed images and text, ensuring that audiences can easily read and comprehend the information presented. Additionally, the PJ1158 supports various resolutions, including up to 1080p, making it compatible with a wide range of video sources and formats.

In terms of connectivity, the PJ1158 offers a comprehensive selection of ports to accommodate various devices. It includes HDMI, VGA, and composite inputs, making it versatile for connecting laptops, DVD players, and other multimedia devices. The inclusion of USB ports also allows for easy plug-and-play functionality, enabling users to present directly from USB drives with minimal setup time.

The PJ1158 utilizes advanced DLP technology, which enhances image quality by providing sharpness, saturation, and contrast. The DLP chip ensures that images are smooth and free from the pixelation that can occur with other projector types. Furthermore, the PJ1158 is equipped with a long-lasting lamp life of up to 15,000 hours, significantly reducing maintenance costs and downtime.

For ease of use, the PJ1158 features a remote control and an intuitive interface, allowing users to navigate menus quickly and adjust settings effortlessly. The integrated 10-watt speaker provides adequate sound output for smaller venues, eliminating the need for external audio systems in many cases.

Overall, the ViewSonic PJ1158 excels in providing a combination of high brightness, resolution, versatile connectivity, and robust build quality. These features make it a solid choice for professionals and educators looking for an efficient and dependable projector for their presentations.
Top Page Image Contents