ViewSonic PJ1158 manual Before using the network functions…, If using a network with Dhcp enabled

Page 62

Network Functions

Before using the network functions…

To use the network functions of this projector, the projector must be configured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network configuration of this projector may cause problems on your network.

Connect to the Gateway (The router/PC that forwards traffic to a destination outside of the subnet of the transmitting device) from the network terminal on the projector using a CAT-5 cable and configure the following settings.

If using a network with DHCP enabled:

The projector’s network settings can be configured automatically. when [DHCP] on the network menu is set to [TURN ON]. Please refer to DHCP in network menu. If a fixed / static IP address is required, please configure your projector ac- cording to the steps in the following section.

If using a network system that does not have DHCP enabled or if using a fixed IP address on a network system equipped with DHCP enabled:

Configure the following settings on the network menu.

1. [DHCP]: Disable DHCP (Set [DHCP] to [TURN OFF]).

2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect to your network.

3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to connect to your network.

4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that forwards traffic to a destination outside of the subnet of the transmitting de- vice) address for the projector to connect to your network.

ViewSonic

PJ1158

57

Page 61 Page 63
Image 62
Page 61 Page 63
Contents ViewSonic Compliance Information Important Safety Instructions Declaration of RoHS Compliance Substance Proposed Maximum Actual ConcentrationCopyright Information Product Registration For Your RecordsContents of package About this manualContent PreparationsContents of package Fastening the lens coverHOT!4 Part namesProjector HOT18 9 Control panelRear panel 10 11 15 16Laser pointer Remote controlBack Remote control It is a beam outletSetting up Suspended from the ceiling ArrangementOn a horizontal surface DownSecurity bar Anti-theft chain or wire Security slot Adjusting the projectors elevatorUsing the security bar and slot FootVCR/DVD player Connecting your devicesSignal source Remote control Speakers Connecting your devices About Plug-and-Play capabilityConnecting power supply AC inlet Connector of the power cord to the outletPutting batteries Remote controlLaser pointer Laser buttonFront and top sensors About the remote control signalChanging the frequency of remote control signal Back sensorUsing as a wired remote control Using as a simple PC mouse & keyboardTurning off the power Power on/offTurning on the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an aspect ratio Searching an input signalSelecting an input signal Using the automatic adjustment feature Adjusting the zoom and focusAdjusting the lens shift  For a video signal or s-video signalCorrecting the keystone distortions Adjusting the positionTion.Use the cursor buttons /// to adjust the picture posi Using the magnify feature Freezing the screenTemporarily blanking the screen Advanced Menu Using the menu functionEasy Menu Enter buttonEasy Menu Easy Menu Picture Menu GammaPicture Menu Color TempMY Memory Active IrisLOAD1, LOAD2, LOAD3, LOAD4 SAVE1, SAVE2, SAVE3, SAVE4Position Image MenuOver Scan Image Menu PhaseAuto Adjust Size3D-YCS Input MenuProgressive Color SpaceVideo Format Input MenuComponent M1-DPort to be set Use the / buttons to select the RGB Input signal type Sync on G on ó Sync on G OFFFrame Lock RGBResolution Resolution MenuSetup Menu Ness are reduced Setup MenuNormal ó Whisper Normal ó Hinvert ó Vinvert ó H&VINVERTAudio Menu Screen Menu BlankScreen Menu Start UPMyScreen registration is finished Capturing error has occurred. Please try againMyScreen MyScreen LockMessage Source NameAuto on Option MenuAuto Search Lamp Time Option MenuAuto OFF FAN Speed ServiceMY Button Lens Type GhostFilter Message Remote Receiv Factory ResetKEY Lock Remote FreqChanging the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Function Using the MyScreen Password FunctionDescription If you have forgotten your Password Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Turning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off IP Address Default GateNetwork Menu Subnet MaskNetwork Menu Controlling the Projector via a Web Browser for Sntp setWork information and confirm settings Information display Use the or Enter buttons to view netControlling the Projector via Scheduling Failure & Warning Alerts via E-mailProjector Management via Snmp Still Image TransferBefore using the network functions… If using a network with Dhcp enabledConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Settings Logon with administrator IDDhcp Displays the Dhcp configuration settingsNetwork Information Dhcp OFF Network SettingsDhcp on Port Settings Mail Settings Alert Settings Temp Error Alert SettingsLamp Error Air Flow ErrorFilter Error Lamp Time ErrorCool Error Lamp Time Alarm Other ErrorSchedule Execution Error Alarm TimeChange Schedule Settings Displays and configures schedule settingsSchedule Setting Date/Time Settings Displays and configures the date and time settingsDate/Time Settings SntpSecurity Settings Security Settings SnmpProjector Control Projector ControlProjector Control Option Audio DescriptionScreen Logoff Projector StatusNetwork Restart Description RestartFailure & Warning Alerts via E -mail Example If the IP address of the projector is set toMail Settings Snmp settings Projector management via SnmpControlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Schedule settings can be configured from a web browser Communication Port Shot Still Image Transfer SettingsShot Still Image Transfer Display Shot Still Image Transfer Settings Shot Still Image Transfer TransmissionCommand Control via the Network Command Control SettingsCommand Control Settings Data RS-232Ccommand Command formatReply Error code Send Data formatReply Data format Authentication Automatic Connection BreakLamp MaintenanceCase of replacement by yourself Type number = RLC-021 Replacing the lampLamp Cleaning the air filter Air filterAir filter Take the old battery out Internal clock batteryIng the battery cover, pick its knob Will come up. Remove the battery Put a new batteryPJ1158 Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product life TimeWarranty and after-service SpecificationSpecifications PJ1158 106Customer Support PJ1158 107Limited Warranty PJ1158 108Limitation of implied warranties PJ1158 109

PJ1158 specifications

The ViewSonic PJ1158 is a versatile and powerful projector designed to meet the demands of both business and educational environments. Known for its impressive performance and user-friendly features, the PJ1158 stands out as a reliable tool for presentations, lectures, and multimedia presentations.

One of the main features of the PJ1158 is its high brightness capability. With a brightness level of up to 4,000 ANSI lumens, this projector ensures clear and vibrant images even in well-lit rooms. This is crucial for environments where ambient light cannot be completely controlled, making the PJ1158 an excellent choice for conference rooms, classrooms, and auditoriums.

The resolution of the ViewSonic PJ1158 is another highlight, as it supports native XGA (1024x768) resolution. This level of clarity allows for detailed images and text, ensuring that audiences can easily read and comprehend the information presented. Additionally, the PJ1158 supports various resolutions, including up to 1080p, making it compatible with a wide range of video sources and formats.

In terms of connectivity, the PJ1158 offers a comprehensive selection of ports to accommodate various devices. It includes HDMI, VGA, and composite inputs, making it versatile for connecting laptops, DVD players, and other multimedia devices. The inclusion of USB ports also allows for easy plug-and-play functionality, enabling users to present directly from USB drives with minimal setup time.

The PJ1158 utilizes advanced DLP technology, which enhances image quality by providing sharpness, saturation, and contrast. The DLP chip ensures that images are smooth and free from the pixelation that can occur with other projector types. Furthermore, the PJ1158 is equipped with a long-lasting lamp life of up to 15,000 hours, significantly reducing maintenance costs and downtime.

For ease of use, the PJ1158 features a remote control and an intuitive interface, allowing users to navigate menus quickly and adjust settings effortlessly. The integrated 10-watt speaker provides adequate sound output for smaller venues, eliminating the need for external audio systems in many cases.

Overall, the ViewSonic PJ1158 excels in providing a combination of high brightness, resolution, versatile connectivity, and robust build quality. These features make it a solid choice for professionals and educators looking for an efficient and dependable projector for their presentations.
Top Page Image Contents