How to operate, Picture Computer / Video Mode

How to operate

1.Press the Menu button to open the OSD menu.

2.When OSD is displayed, use S / T to select any feature in the main menu.

3.After selecting the desired main menu feature, press X to enter sub-menu for feature setting.

4.Adjust the settings with W / X.

5.Press the Menu button, the screen will return to the main menu.

6.To exit OSD, Press the Menu button again. The OSD menu will close and the projector will automatically save the new settings.

Picture (Computer / Video Mode)

Brightness

Brighten or darken the image.

Contrast

Set the difference between light and dark areas.

Color Setting

Adjust the color temperature. At higher temperature the screen looks colder; at lower temperature, the screen looks warmer. If you select “User”, “Red”, “Green” and “Blue” cab be adjusted.

Keystone

Correct the keystone distortion.

Aspect Ratio

Select how the picture fits on the screen:

4:3 : The input source will be scaled to fit the projection screen.

16:9 : The input source will be scaled to fit the width of the screen.

Image

There are many factory presets optimized for various types of images.

PC	: For computer or notebook.
Movie	:	For home theater.
sRGB	: For PC standard color.
User	:	Memorize user’s settings.

Screen Type

Select the projection screen type.

White Intensity

Increase the brightness of white areas.

Gamma

Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.

ViewSonic

PJ551D