ViewSonic PJ551D-2 warranty Replacing the Lamp

Page 25

Replacing the Lamp

As the projector operates over time, the brightness of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage. We recommend replacing the lamp if a warning message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement.

„The lamp becomes high temperature after turning off the projector with the power button. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least 45 minutes for the lamp to cool down.

„Do not touch the lamp glass at any time. The lamp may explode due to improper handling, including the touching of the lamp glass.

„Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

„A lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

„Wear protective gloves and eyeglasses when fixing or detaching the lamp.

„ Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least for 5 minutes to turn off the projector after powering on.

„ Do not operate the lamp in proximity to paper, cloth, or other combustible material nor cover it with such materials. Otherwise it could cause a fire.

„Do not operate the lamp in an atmosphere containing an inflammable substance, such as thinner. Otherwise it could cause a fire or explosion.

„Thoroughly ventilate the area or the room when operating the lamp in an oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches, nausea, dizziness, etc.

„The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury inside the lamp will go out of the projector. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user’s health.

ViewSonic

19

PJ551D

Image 25
Contents ViewSonic FCC Statement Compliance InformationImportant Safety Instructions Substance Proposed Maximum Actual Concentration Declaration of RoHS ComplianceProduct Registration Copyright InformationContents Introduction Package Contents Front View Projector OverviewBottom View Rear ViewControl Panel Using the ProductButton Function Connection Ports S / Page T Computer mode only Remote ControlFor the first time use For battery changeRemote Control Operation Connecting the Projector InstallationPowering On the Projector Powering On/Off the ProjectorPowering Off the Projector Adjusting the Projector Height Adjusting the ProjectorAdjusting the Projector Zoom and Focus Adjusting Projection Image Size Menu Operation Picture Computer / Video Mode How to operateVideo Image Video Mode Computer Image Computer ModeSetting Computer / Video Mode Language Computer / Video Mode Option Computer / Video ModeFactory Default Computer / Video Mode DCR Dynamic Contrast RatioCleaning the Lens MaintenanceCleaning the Projector Housing Replacing the Lamp ViewSonic PJ551D Specifications Appendix LED Indicator MessagesComputer Compatibility ModesVideo Start-up problems TroubleshootingImage problems Remote control problemsCountry/Region Web Site =Telephone Mail =Fax Customer SupportViewsonic Projector Limited WarrantyLimitation of implied warranties Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México